- Description / Features / Spec
Casella CEL-352 dBadge Plus Kit (1x I.S. dBadge Plus with 3-way charger)
This CEL-352 dBadge Plus Kit includes an intrinsically safe dBadge Plus instruments and a 3-way charger.
The CEL-350 dBadge Plus is part of a range of different nose monitoring instruments, ideal for personal noise exposure. This particular monitor from Casella instruments can be applied for noise dosimetry in instances such as measuring personal noise exposure, assessing and monitoring noise in the workplace, ensuring compliance with Workplace Noise Regulations and selection of effective hearing protection.
Built In Display and Simple 2 Key Operation
The display shows measurement status and data and also has a ‘fuel gauge’ display for memory and battery information. A ‘pro’ mode is available which enables projected exposure values to be displayed. The noise dosimeter also comes with an optional, ultra-bright LED action level alarm function which gives indication of when exposure action levels have been exceeded. These action levels can be configured via the Insight software and used to instantly see if noise control or hearing protection measures are needed. There is no external equipment needed to operate this sound level meter and it is simply used by the 2 keys on the side of the instrument.
Intelligent Fast Charging System
A single mains supply can supply up to 12 dBadge units and due to the battery technology and intelligent charging method used, the unit does not have to be continually on charge. The standard 3-way charger can be used to manage many units.
There is enough battery life and memory capacity to perform many consecutive shift measurements without charging or downloading and recharging only takes 90 minutes. Full charge gives the noise dosimeter a 28 hour operating time.
Variety of Mounting Options
There is a choice of mounting clips combine with the light weight and size of the CEL-350 sound level meter to make it both unobtrusive and comfortable to wear on the shoulder. The clips available to the user are crocodile clips (fitted), pin clips and a hard hat mounting kit which all provide comfort and protection from dusty environments.
The dBadge Plus measures simultaneous ‘C’ and ‘A’ weighted LCeq, and LAeq measurements, which can then be used to calculate the effectiveness of hearing protection by either the SNR or HML method. This data can be viewed and analysed via Insight software. ‘Pro’ mode, available on CEL-350 and CEL-352 models, allows additional exposure values to be displayed.
The CEL-350 downloads to a PC automatically using Casella Insight software, simply by pointing the noise dosimeter at the infra-red download cable provided.
Results recorded from noise dosimetry can be stored in a simple tree structured database, by person, place or process etc. They can also be automatically colour coded to identify exceeded noise levels and an automatic report can be generated.
Intrinsically Safe (I.S.) models
To meet the requirements of ATEX EEx ia I M1, EEx ia IIC T2 II 1 G, certificate number 07ATEX2032X and IECEx Ex ia I Ma, Ex ia IIC T2 and certificate number IECEx SIR 11.0063X an Intrinsically Safe version of the CEL-350 dBadge series is available, making the I.S. dBadge Plus suitable for use in hazardous areas such as mines, printing works or petrochemical plants.
- Compact, rugged (rubber over moulded) design weighs only 71g
- No cables to damage or get in the way
- Measures and logs all workplace noise parameters
- 28 hour battery life, fully charges in 90 minutes
- Integrated display and visual exposure alarm
- Simple auto-calibration function
- Comprehensive software package
- Pro mode displays dose and projected dose values
- Run duration timers
Linear operating range 65.0 to 140.0dB RMS Peak measurement range 95.0 to 143.0dB Peak Frequency weightings RMS A Frequency weightings Peak C, A, Z (Linear) Time weightings Slow, Fast & Impulse Amplitude weightings Q=3 & Q=5 Selectable thresholds 2 (70 to 90dB), selectable in 1dB steps Selectable criterion 1 (70 to 90dB), selectable in 1dB steps Memory capacity 64kB (180 Hours of measurements) Default modes ISO or OSHA Calibration information Calibration dates, times and levels Security Lock via keys Power supply Internal NiMH cells Battery life 32 Hours run capacity Size mm (in) 72x47x52 (2.8x1.8x2.0) inc windshield Weight g (oz) 68 (2.4) Data storage Non-volatile, 10 years of storage Display Graphic LCD 96 x 26 pixels Output (PC) Infra-red download cable (supplied) to
Applied Standards IEC 61252:2002 Personal Sound Exposure Meters ANSI S1.25:1991 Personal Noise Dosimeters Measured Parameters ISO LAeq, LCpeak, LAEP,d, Pa2Hours OSHA LAavg (Q=5), LZpeak, LASmax, %dose (Q=5), TWA
General LAFmax, LAFmin, LASmin (via dB35) LAIeq, LAImax, LAImin, LApeak Time history LAeq, LZpeak, LCpeak,
LAavg (Q=5) Stored as 1 minute values
Storage All parameters
Environmental Conditions In storage Temperature: -10 to +50oC,
Humidity: 30 to 95% RH
In operation Temperature: 0 to +40oC What's Included?
- 1x I.S. dBadge Plus instrument
- CEL-120/2 Acoustic Calibrator
- CEL-6355 kit case
- 193200B Infra-red to USB (PC) download cable
- CEL-6352 crocodile clip mounting kit
- CEL-6351 pin mounting kit
- CEL-6362 3-way charger
- HK111 screwdriver for changing mounting clips
- Calibration certificates for dBadge and CEL-120/2 Acoustic Calibrator
We offer a range of delivery options to suit your needs including FREE UK delivery on all orders. All UK and International orders are sent using a fully trackable and reliable courier service. You will receive an email notification upon despatch of your order and tracking details can be requested at any time should you wish to check the status of your delivery.
Shipping costs are dependant on delivery address and will be calculated at the time of checkout. Delivery costs are based on a maximum weight of 20kg and maximum dimensions of 40 x 40 x 40 cm. For orders exceeding these weights and dimensions, please contact us on email@example.com for a delivery quote.
For UK orders, goods will normally be delivered within 3 - 5 working days and for all other orders within 5 - 10 working days. Delivery timescales are based on stock availability and are subject to change at any time.
Note: We recommend you inspect all goods prior to signing for and accepting delivery. If there is any visible damage to the outer packaging, ensure goods are sign for as damaged. In instances where it isn’t possible to sign for goods as damaged, these should be signed for as unexamined.
Order Cancellation and Goods Return
Should you wish to cancel an order or return unwanted goods please follow the procedures detailed below to help us ensure cancellations/returns are processed as quickly and efficiently as possible.
Cancelling An Order Before Despatch
Simply log on to your customer account, note the order reference number and email the full cancellation details to firstname.lastname@example.org or contact us on 0844 550 0001. Assuming the order has not been despatched we will cancel.
Cancelling An Order After Despatch
You have the right to cancel the purchase of goods without having to give a reason at any time within the “cooling off period” of seven working days, beginning the day after you take delivery of your order.
You must notify us of your cancellation in writing via email to email@example.com or to our contact address. (Details Here)
If you are in possession of the goods you are under the duty to retain them and take reasonable care of them.
You must send the goods back to us in their original condition to our contact address at your own cost (unless we delivered the item to you in error or the item is damaged or defective) as soon as possible once you have cancelled the contract.
Alternatively we will collect the goods from you which will incur a charge no greater than the actual cost of arranging the collection and shipping. In this case you must make the goods available for collection. We will contact you to make further arrangements.
We reserve the right to make a charge not exceeding our direct costs of recovering the goods if you do not return the goods or return them at our expense.
Upon receipt of returned items in satisfactory condition we will arrange a full credit by the same method used to pay for the goods originally. Any credit due will be processed within a maximum of thirty days.
Note: If you wish to return goods for refund or exchange after 14 days, a re-stocking fee of 20% of the full order total will apply.
Faulty, Damaged or Incorrectly Supplied Goods
If upon receipt of goods you find them to be faulty, damaged or if you have been incorrectly supplied an item, you should notify us within 24 hours by contacting 0844 500 0001 or firstname.lastname@example.org and quoting your order number and contact details.
Frontline Safety will arrange uplift of any damaged or wrongly received goods and if on inspection of goods we also find them to be damaged, faulty or incorrectly supplied, we will offer replacement goods or provide a full refund.
We recommend you inspect all goods prior to signing for and accepting delivery. If there is any visible damage to the outer packaging, ensure goods are sign for as damaged. In instances where it isn’t possible to sign for goods as damaged, these should be signed for as unexamined.
Note: If your goods happen to develop a fault out with the standard returns period but within supplied warranty period or if you require any additional assistance, please contact us on 0844 550 0001 or email email@example.com
All postage, handling, customs and duty charges for all returned goods are the responsibility of the customer. We recommend using a fully traceable, insured service as goods are your responsibility while in transit.
- Buy on Finance
Get in touch with us to discuss finance options