Casella TUFF Dust Sampling Kit
PLEASE NOTE: This kit is now obsolete. It has been replaced by the Casella Tuff Sampling Starter Kit (without monitor).
Casella TUFF Pump Kit, includes: TUFF pump & charger, Inhalable Sampling Head, Cyclone Head, Flowmeter 0-4l/min, Calibration Adaptor, Cassettes, GFA Filters & MCE Filters
The Casella TUFF pump is ideally suited to a wide range of occupational health sampling applications, ranging from simple abatement sampling of lead and asbestos, to more specialised industrial hygiene monitoring of dusts, fumes and vapours. Ergonomically designed for user comfort - the TUFF pump has an easy to read display with high intensity alarm LED’s for fault indication.
Other features of the Tuff pump include an real-time flow display, sampled volume and run duration and alarm display for flow or battery fault conditions. The keypad is also lockable and a 'fuel gauge' is displayed for battery information.
- Robust and reliable design for harsh environments (IP54)
- Rubber over-moulded sealed case
- Outstanding operation duration
- Exceptional flow control
- Intelligent battery management
- High intensity status/alarm LED's
Flow Range |
5 ml/min (with low flow adaptor) to 4.5 l/min |
Flow Control Accuracy |
Control typical < +/- 3% at calibrated point |
Inlet Pulsation Ratio |
<10% @ 2 l/min |
Runs Stored |
100 (Pro Versions Only) |
Display |
100 x 32 Graphics LCD |
Typical Charge Time | < 5hrs from discharge |
Size mm |
133 x 87 x 47 mm |
Weight gm |
480g |
Service Interval |
Recommended 2500hrs |
IP Rating |
Gasket Sealed Case IP54 |
Intrinsic Safety Approvals |
(IECEx, ATEX, ANZEx) |
|
|
Environmental |
|
In Storage |
Temperature: -10 to +50°C |
In Operation |
Temperature: 0 to 45°C |
Operation Duration |
@ 2.0L/min via 25mm GFA filter: |
|
|
What's Included? |
|