Drager X-am 5000 Gas Detection Kit CatEx, O2, Dual CO/H2S, NH3
The Drager X-am 5000 is ideal for personal monitoring applications and use in explosive atmospheres. It combines hydrogen sulphide and carbon monoxide sensors with O2 oxygen, a combustible gas Ex sensor and also an Ammonia NH3 sensor.
The Ex sensor in particular has a high level of sensitivity and resistance against sensor poisons such as silicone and hydrogen sulphide.
It has the ability to monitor up to five gases and you can have confidence that your X-am multi gas detector will increase your work safety. It also features tough rubber housing and shock-proof sensors.
The X-zone 5000 can be used in conjunction with the X-am 5000 for area monitoring applications and the Drager Bump Test Station and X-dock testing and calibration station can be used to carry out functional tests and bump tests.
- Resistant to electromagnetic interference
- Pre-entry checks possible due to an optional external pump
- Retro-reflective label makes it easy to see
- Large, clear display
- Energy save mode increases operating time to > 40 hours
- Datalogging capability >1000 hours with 5 gases and a recording interval of 1 value per minute
- Results can be read out via Infrared
- Gas inlets featured at the top and bottom of the device
Range (ppm) |
|
Resolution (ppm) |
|
Response Time (T90) |
|
Dimensions | 48 x 130 x 44 mm; 1.89 x 5.12 x 1.73 in. |
Weight | 220 - 250 g; 7.8 - 8.8 oz. |
Ambient Conditions |
|
Operating Time | >12 hours (without Ex sensor > 700 hours), >40 hours – save energy mode |
Charging Time | < 4 hrs |
IP Rating | IP 67 – water and dust resistant |
Alarms |
|
Certifications |
|
What's Included |
|