Drager X-am 5000 Gas Detection Kit CatEx, O2, Dual CO/H2S, O3
Ideal for personal monitoring applications and can be used in explosive atmospheres the Drager X-am 5000 features a combustible gas Ex sensor, an O2 oxygen sensor, an O3 Ozone sensor and also a combined CO carbon monoxide and H2S hydrogen sulphide sensor.
With the ability to detect up to five gases the detector should able to detect CO, H2S, O3 and oxygen depletion safely. It has tough rubber housing and shock-proof sensors.
The innovative Ex sensor has a high level of sensitivity high resistance against sensor poisons such as silicone and hydrogen sulphide.
The X-zone 5000 can be used in conjunction with the X-am 5000 to carry out area monitoring applications and the Drager Bump Test Station and X-dock testing and calibration station can both be used to carry out functional tests and bump tests.
- Resistant to electromagnetic interference
- Pre-entry checks possible due to an optional external pump
- Retro-reflective label makes it easy to see
- Large, clear display
- Energy save mode increases operating time to > 40 hours
- Datalogging capability >1000 hours with 5 gases and a recording interval of 1 value per minute
- Results can be read out via Infrared
- Gas inlets featured at the top and bottom of the device
Range (ppm) |
|
Resolution (ppm) |
|
Response Time (T90) |
|
Dimensions | 48 x 130 x 44 mm; 1.89 x 5.12 x 1.73 in. |
Weight | 220 - 250 g; 7.8 - 8.8 oz. |
Ambient Conditions |
|
Operating Time | >12 hours (without Ex sensor > 700 hours), >40 hours – save energy mode |
Charging Time | < 4 hrs |
IP Rating | IP 67 – water and dust resistant |
Alarms |
|
Certifications |
|
What's Included |
|