EntryRAE (PGM-3000) 10.6 eV PID Gas Detector & Accessories Kit

Product Code - 046-P000-111
Ex Vat £1218.00
Inc Vat £1461.60
in stockdelivery
  • Description
  • Key Features
  • Specifications

EntryRAE (PGM-3000) 10.6 eV PID Gas Detector with Accessories Kit & ATEX Charging Cradle

The EntryRAE multi gas detector provides the user with protection from the unexpected through the addition of a photoionisation VOC (volatile organic compounds) detector to the traditional four-sensor configuration of a confined space monitor (O2, %LEL, CO and H2S).  This 4 gas detector is easy to operate with minimal training, simple to calibrate and provides reliability in multi gas detection.  

The PID sensors are accurate and reliable and the self-cleaning feature reduces the frequency sensor lamp cleanings.  Four other sensors are also supported in CO, H2S, LEL and O2. 

RAE’s multi gas detector can operate continuously for up to 16 hours and has a durable, weather-resistant rubber housing which is suited for many different applications including refineries and chemical processing.   

The EntryRAE has a large display which is easy to read and has an auto-backlight to improve visibility.  It has a loud audible alarm which vibrates and has a highly visible flashing LED alarm.  There is also a low-flow pump alarm.  

Other features of RAE’s 4 gas detector is a powerful pump, used to draw samples from up to 30m, a fully integrated, automatic datalogging system and versatility in terms of battery packs and charging.  

Automatic calibration is also easy and possible through using AutoRAE Test and Calibration Station.

Proven Performance

  • Reliable, fast, and accurate PID sensor
  • The self-cleaning feature reduces the frequency of PID sensor lamp cleanings
  • Up to four additional sensors supported, including CO, H2S, LEL and O2
  • Up to 16 hours of continuous operation
  • Powerful pump allows sample draws from up to 100 feet (30 meters)
  • Durable, weather-resistant rubber body 
  • Full datalogging (automatic) 

Easy to Use

  • Simple to operate, minimal training
  • Easy, automatic calibration with AutoRAE Test and Calibration Station

Focused on Worker Protection

  • Loud audible, vibration, and highly visible red flashing LED alarm
  • Low-flow pump alarm
  • Large, easy-to-read display with auto-backlight

Versatile

  • Suitable for a wide variety of applications involving confined space entry
  • Interchangeable Lithium-ion and alkaline battery packs
  • Charging cradle doubles as an external battery charger
Gas 1 PID
Range (ppm) 0 to 999 ppm VOC
Resolution (ppm) 1 ppm VOC
Size 5.9" L x 3.3" W x 1.9" H (15 x 8.3 x 4.8 cm) without clip
Weight 20 oz (567 g) with battery and clip
Sensors
  • Protected catalytic bead for combustible gases (LEL)
  • Electrochemical sensors for oxygen (O2) and hydrogen sulfide (H2S) and carbon monoxide (CO)
  • Modular photoionization detector for broadband detection of VOCs using 10.6 eV lamp
Battery
  • Drop-in rechargeable Li-ion battery pack
  • Standard alkaline battery adapter
  • Charging cradle doubles as external battery charger
Alarms 
  • Audible (95dB at 30 cm), visible, and vibration
  • High: 3 beeps and flashes per second
  • Low: 2 beeps and flashes per second
  • STEL and TWA: 1 beep and flash per second
  • Low battery displays empty battery symbol, 1 beep per minute
Keypad Three-button operation
Direct Readout
  • Oxygen as percentage by volume
  • Combustible gas as percentage of lower explosive limit (LEL), percentage by volume
  • VOCs, CO and H2S as parts per million
  • TWA and STEL values for VOCs, CO and H2S
  • High and low values for all gases
EMI/RFI Highly resistant to EMI / RFI. Compliant with EMC Directive 89/336/EEC
IP Rating IP-55: protected against dust, protected against low pressure jets of water from all directions
Communication PC to monitor via RS232 (USB adapter available)
Calibration Two-point field calibration for zero and span gas
Sampling Pump Built-in pump, 300 cc per minute flow rate
Low Flow Alarm Auto shutoff at low-flow condition
Certifications
  • US/Canada: UL, cUL Class 1 Division 1, Groups A, B, C, D T3C
  • Europe: ATEX II 2G EEx ia d IIC T4
Temperature UL/cUL: -20° to 50°C; ATEX: -20° to 47°C
Humidity 0% to 95% relative humidity (non-condensing)
Attachments Stainless-steel alligator clip (installed), wrist strap
Warranty
  • Lifetime on non-consuming components (per RAE Systems Standard Limited Warranty)
  • 1 year for PID sensor, 1 year for pump and battery
What's Included
  • Monitor with sensors, asspecified
  • Li-ion rechargeable battery
  • Alkaline battery adapter
  • 5 external filters
  • Charging cradlewith 120 V or 230 V AC adapter
  • ProRAE Studio software
  • Computer interface cable
  • Calibration adapter
  • User manual
  • Shipping case
  • Hard transport case with pre-cut foam
  • Tool Kit
  • Sampling wand with 10' (3 meters) of self-coiling Teflon tubing
MasterCard SecureCode Verified by Visa SagePay PayPal Amex Maestro Mastercard Visa

©2012 Frontline Safety Ltd. All rights reserved. Website design company Adeo Group