The EntryRAE multi gas detector provides the user with protection from the unexpected through the addition of a photoionisation VOC (volatile organic compounds) detector to the traditional four-sensor configuration of a confined space monitor (O2, %LEL, CO and H2S). This 4 gas detector is easy to operate with minimal training, simple to calibrate and provides reliability in multi gas detection.
The PID sensors are accurate and reliable and the self-cleaning feature reduces the frequency sensor lamp cleanings. Four other sensors are also supported in CO, H2S, LEL and O2.
RAE’s multi gas detector can operate continuously for up to 16 hours and has a durable, weather-resistant rubber housing which is suited for many different applications including refineries and chemical processing.
The EntryRAE has a large display which is easy to read and has an auto-backlight to improve visibility. It has a loud audible alarm which vibrates and has a highly visible flashing LED alarm. There is also a low-flow pump alarm.
Other features of RAE’s 4 gas detector is a powerful pump, used to draw samples from up to 30m, a fully integrated, automatic datalogging system and versatility in terms of battery packs and charging.
Automatic calibration is also easy and possible through using AutoRAE Test and Calibration Station.
Proven Performance
Easy to Use
Focused on Worker Protection
Versatile
| Gas 1 | PID |
| Range (ppm) | 0 to 999 ppm VOC |
| Resolution (ppm) | 1 ppm VOC |
| Gas 2 | LEL |
| Range (ppm) |
|
| Resolution (ppm) |
|
| Gas 3 | Oxygen (O2) |
| Range (ppm) | 0 to 30% |
| Resolution (ppm) | 0.1% |
| Size | 5.9" L x 3.3" W x 1.9" H (15 x 8.3 x 4.8 cm) without clip |
| Weight | 20 oz (567 g) with battery and clip |
| Sensors |
|
| Battery |
|
| Alarms |
|
| Keypad | Three-button operation |
| Direct Readout |
|
| EMI/RFI | Highly resistant to EMI / RFI. Compliant with EMC Directive 89/336/EEC |
| IP Rating | IP-55: protected against dust, protected against low pressure jets of water from all directions |
| Communication | PC to monitor via RS232 (USB adapter available) |
| Calibration | Two-point field calibration for zero and span gas |
| Sampling Pump | Built-in pump, 300 cc per minute flow rate |
| Low Flow Alarm | Auto shutoff at low-flow condition |
| Certifications |
|
| Temperature | UL/cUL: -20° to 50°C; ATEX: -20° to 47°C |
| Humidity | 0% to 95% relative humidity (non-condensing) |
| Attachments | Stainless-steel alligator clip (installed), wrist strap |
| Warranty |
|
| What's Included |
|