The 306 system is designed to monitor gas levels from a number of sample-points, targeted at situations where the positioning of conventional gas sensors may not be practical.
This may be due to equipment security, cable routing, access for detector head installation/maintenance, harsh environment or a cost effective means of monitoring designated hazardous areas, typically - tunnels, marine applications, underground/high level voids, process control, landfill, multi storey car parks, brewing, horticulture, superstore multi refridgeration units.
Gas samples are sequentially extracted for a timed period by a central control unit via fixed sample lines. A high rate sample is taken by the main pump during which a reduced rate sample is passed across the sensor device. The central unit provides gas level readouts with two alarm trip points per line, providing a range of signal outputs for annunciator and control functions.
| Sample Points | 1-20 |
| Sensors | 2 - standard |
| Measurements | Combustible gas - lel % vol |
| Toxic gas – ppm % vol | |
| Oxygen – % vol | |
| Depletion/enrichment | |
| Refrigerant – ppm | |
| Power Supply | 230/115vAC 50/60Hz 300W max |
| LED indicators | System healthy |
| Main power | |
| Standby power | |
| High gas alarm | |
| Low gas alarm | |
| System, flow, sensor fail | |
| Comms fail | |
| Skip/hold | |
| Sampling | |
| Display | 4 line alpha/numeric indicates all functions and status in text. Sample line locations (user settable) |
| User interface | 8 panel mounted push buttons – main panel and remote panel:- Reset, Scroll, Hold, Dim, enter, Down, up, Select |
| PC – event log / data log, data to and from system controls | |
| Relay Outputs | Global Low S.P.C.O. |
| Global High S.P.C.O. | |
| Global Fault S.P.C.O. | |
| Flow Fail S.P.C.O. | |
| Power Fail S.P.C.O. | |
| Cabinet Sensor S.P.C.O. | |
| 32 programmable relays Additional 32 optional | |
| Communication | RS232– Data Stream |
| Modbus 2 x RS485 | |
| Can bus – internal | |
| General | Audible alarm all alarm conditions |
| LED/display dimming | |
| User/Eng password | |
| LCD backlight | |
| Event logging | |
| Sample line size 8mm OD 6mmID | |
| Nylon, PTFE, Copper, Stainless Steel. max length 100m specials 100m+ | |
| Sample vent x 2-10mm | |
| Tubing entry enclosure base, side option | |
| Response time 15 to 45 seconds | |
| Colour - powder coat ash grey BSA01 | |
| Size 400mm H x 450mm W x 200mm D | |
| IP 63 | |
| Wall mount | |
| Weight 20kg | |
| Standards | EN60945: 2002 Maritime general requirements |
| EN61010: 2001 electrical Safety - LVD | |
![]() |
|
DELIVERY OPTIONS:
UK Orders
There are various shipping options that you can select in the checkout area.
Standard Delivery FREE - Standard delivery items will be delivered via the Royal Mail in the UK.
Items generally take between 2-4 working days to arrive (Mon-Fri). If you place your order after 1PM Mon-Fri then please allow 2-4 working days from the following day.
Occasionally due to reasons out of our control such as bad shipping conditions in the Channel Islands items may take a day or two longer than usual to arrive.
Recorded Delivery £0.75 - Recorded delivery items will be delivered via the Royal Mail in the UK and will require a signature upon arrival.
Items generally take between 2-4 working days to arrive (Mon-Fri). If you place your order after 1PM Mon-Fri then please allow 2-4 working days from the following day.
Occasionally due to reasons out of our control such as bad shipping conditions in the Channel Islands items may take a day or two longer than usual to arrive.
All items are sent in protective jiffy bags and should reach you in an unopened and brand new condition.
International Orders
We accept orders from international customers as long as you are using either Visa or Mastercard as your payment method. We have two shipping options for International customers:
Standard Airmail Standard Airmail items will be delivered by your local postal service and should take between 3-7 days to reach the customer depending on the country where the order is being delivered. Standard Airmail does not provide a tracking number and is not insure for loss or damage. We cannot be held responsible for any International orders that go missing using standard Airmail.
We will not be held resonsible for any International orders that go missing in transit. There is always an added risk when sending items overseas. Unfortunately we cannot offer an insured service for International orders at present.
©2012 Frontline Safety. Web Design Company Adeo Group