The XDI Gas Sensor is capable of utilising a wide range of sensor cell types offering an unmatched number of configurations allowing for a simple stand alone 4~20mA transmitter or a CAN bus address system enabling networking of up to 64 process sensors with a local diagnostics port which allows interrogation using a PC, network sensors may also provide individual independent 4~20mA outputs.
A sensor network when connected to a Frontline Safety Combi alarm panel may be addressed and checked for alarm conditions and general sensor status providing a wide range of options for controls and indications.
| Sensor Type | Infra Red, Electrochemical, Catalytic, Semiconductor | |
| Gas Type | Flammable gases - LEL / %Vol | |
| Toxic gases - for full listing see www.gds-technologies.co.uk | ||
| Range - see www.gds-technologies.co.uk | ||
| Classification | Housing Flameproof | |
| EExd IIC T6 | ||
| II2GD | ||
| Cert No FTZU-06ATEX0296X | ||
| F1 sensor - flameproof | ||
| EExd IIC T6 | ||
| II2GD | ||
| Cert No SIRA-03ATEX1176X | ||
| Cert No SIR 06.0016X | ||
| Power Supply Outputs | 15 to 30vDC | |
| 3 wire (4~20mA) 4 wire (Addressable) | ||
| Optional relays - Low alarm S.P.C.O 0.5A @30vDC High alarm S.P.C.O Fault alarm S.P.C.O Inhibit option during servicing |
||
| Housing material Finish | Copper free aluminium alloy, optional stainless steel | |
| Chemical resistant epoxy paint | ||
| Optional - Marine grade finish | ||
| Ingress Protection | IP63 + weather shield IP65 | |
| Cable Entry | 2 x M20 - 1.5 pitch - alternatives 25mm - 3/4 NPT | |
| Weight | 1.6kg | |
| Temperature | -10˚C to +50˚C | |
| Humidity | 0 to 99% RH non-condensing | |
|
||
| 003-010 | Collector Cone & Universal Fitting | |
| 003-020 | Universal Fitting, (Test Gas Applicator/ Spray Deflector) | |
| 003-031 | Filter - Particulate | |
| 008-311 | Flow Adaptor | |
| 003-090 | Duct Mount Kit | |
| 003-035 | 003-035 | |
![]() |
||
DELIVERY OPTIONS:
UK Orders
There are various shipping options that you can select in the checkout area.
Standard Delivery FREE - Standard delivery items will be delivered via the Royal Mail in the UK.
Items generally take between 2-4 working days to arrive (Mon-Fri). If you place your order after 1PM Mon-Fri then please allow 2-4 working days from the following day.
Occasionally due to reasons out of our control such as bad shipping conditions in the Channel Islands items may take a day or two longer than usual to arrive.
Recorded Delivery £0.75 - Recorded delivery items will be delivered via the Royal Mail in the UK and will require a signature upon arrival.
Items generally take between 2-4 working days to arrive (Mon-Fri). If you place your order after 1PM Mon-Fri then please allow 2-4 working days from the following day.
Occasionally due to reasons out of our control such as bad shipping conditions in the Channel Islands items may take a day or two longer than usual to arrive.
All items are sent in protective jiffy bags and should reach you in an unopened and brand new condition.
International Orders
We accept orders from international customers as long as you are using either Visa or Mastercard as your payment method. We have two shipping options for International customers:
Standard Airmail Standard Airmail items will be delivered by your local postal service and should take between 3-7 days to reach the customer depending on the country where the order is being delivered. Standard Airmail does not provide a tracking number and is not insure for loss or damage. We cannot be held responsible for any International orders that go missing using standard Airmail.
We will not be held resonsible for any International orders that go missing in transit. There is always an added risk when sending items overseas. Unfortunately we cannot offer an insured service for International orders at present.
©2012 Frontline Safety. Web Design Company Adeo Group