Frontline 30J F1 - Gas Sensor
The Frontline 30J F1 Gas Sensor is designed for the detection of LEL levels of Hydrocarbon gases within a non-classified (safe) area.
The 30J junction box is manufactured from a flame retardant ABS material, coloured white to RAL 9003. The junction is supplied with a number of pre-assigned cable/conduit entries and a variety of fixing points for surface or stand-off mounting. The junction box maintains an Ingress Protection rating of IP64.
The F1 sensor is manufactured from stainless steel and carries an IP63 rating (IP64 when used with the universal fitting). The F6 sensor is both ATEX and IECEX certified but, when used in conjunction with the 30J enclosure, is suitable for installation within non-classified areas only.
Type F1 - Hazardous Area Use
Detector Head Type
IP63, + Universal fitting IP64
Stainless Steel 316 S16
Size - 32 mm x 33 mm (L x D)
Weight - 166 g
Type - 30J Safe Area Use Only
ABS Flame retardent FR40
Lid Screws M4SS
Signal White RAL 9003
Rear 5-20mm knock outs. Sides, Top, Bottom - not specified
- Standoffs - M4 or No 8 screws
- Drill at (C) when standoffs removed
- Conduit box - drill at (A) 4.5mm
- Surface mount box - drill at (B) 4.5mm
EU Design No.
- Technical Drawings