BW Flex (Cat) LEL(F) O2 H2S CO Serviceable Diffusion Multi Gas Detector
The BW Flex is a serviceable multi gas detector from BW Technologies. This particular model is diffusion and holds sensors for LEL (filtered and catalytic), Oxygen (O2), Hydrogen Sulphide (H2S) and Carbon Monoxide (CO).
These gases can be simultaneously detected in several applications. The BW Flex is a robust and reliable gas detector that can withstand tough environments. It is a fully serviceable diffusion unit and can show real-time readings immediately.
The BW Flex comes with a USB charging cable, however the unit is designed to run on a battery of 15 hours of use for around 40 days. Charging your unit only takes around 4.5 hours, which means down time can be kept to a minimum.
Like the BW GasAlertMicroClip XL, the Flex gas detector has one-button operation. This keeps the design simple with straightforward operation. When switched on the BW Flex will perform a self-test. This will perform diagnostics on the sensor and circuitry. This will continue to automatically perform an analog sensor diagnostic every 10 minutes.
- Event and Datalogging (50 alarm events)
- Bluetooth capability, download the Honeywell Safety apps
- Battery runtime of up to 2 months
- 5 years+ lifetime
- Intelliflash compliance light, flashes green, amber or red to show status
- Compatible with the IntelliDoX calibration station
- IP 66/68 rated
Sensor Ranges |
· CatLEL – 0 to 100% LEL · O2 – 0 to 30% Vol · H2S – 0 to 200ppm · CO – 0 to 2000ppm |
Sensor Resolution |
· CatLEL – 1% LEL · O2 – 0.1% Vol · H2S – 1ppm (can set to 0.1ppm) · CO – 1ppm |
Sensor Working Temperatures |
· CatLEL – -20°C to 60°C (-4°F to 140°F) · O2 – -40°C to 60°C (-40°F to 140°F) · H2S – -40°C to 60°C (-40°F to 140°F) · CO – -40°C to 60°C (-40°F to 140°F) |
Size |
108.2 mm x 61.5 mm x 43.2 mm (4.29 in x 2.44 in x1.7 in) with Alligator Clip |
Weight |
With Catalytic LEL: 189 g (6.7 oz) with Alligator Clip |
Datalogging/Event Logging |
50 alarm events Continuous datalogging (45 days at 15 seconds interval and 8 hours per day). User configurable datalogging interval (5 to 60 seconds) |
Alarms |
· Visual - 6 Main Alarm LED's and 4 sensor LEDs · Audible - 95 dBA at 10cm · Vibrating |
Working Temperature & Humidity |
· -40°C to 60°C (-40°F to 140°F) and -20°C to 60°C ( -4°F to 140°F ) with Catalytic LEL sensor · 5%-95% RH |
Typical Battery Life |
40 days @ 8 hours of use per day with IR LEL 15 hours with Catalytic LEL (with NDIR CH4 sensor) |
Connected Worker |
Bluetooth® Low Energy (BLE) – Ability to connect to Honeywell’s Safety Communicator App, Device Configurator App and Safety Suite Device Configurator Software |
Certifications & Approvals |
ATEX, IEC Ex, contains FCCID, contains IC, CSA approval pending |
Device Warranty |
Three-year warranty for sensors and detector |
User Options (Configurable - User options only available via Device Configurator and Safety Suite Device Configurator) |
• Change High, Low, TWA and STEL alarm set points • Latching alarms • Set Calibration and/or bump test reminders • Assign worker and location assignments • Always on |