large image
Over 6000 products
Loading...
PRODUCT CODE
CROWCON-T4X

The T4X is Crowcon's latest gas monitor on the market and uses next-generation MPS and Long-Life O2 sensor technologies.

Read our Crowcon T4X blog to learn more about the monitor and its capabilities.

* Required Fields

    £602.40 £502.00

     

    Additional services

    • £50.00
    Gas detection equipment requires service and calibration every 6 months. In acknowledgement of this we are offering you your first calibration at a special rate.

    Crowcon T4X Multi-Gas Detector

    Crowcon T4x Multi-Gas Detector

    The popular T4 Multi-Gas detector from Crowcon Detection Instruments Ltd has upgraded its sensor technology. The T4 (now T4x) portable gas detector's capacity has been considerably enhanced with the addition of new MPSTM and LLO2 sensors and a dual hazardous sensor.

    T4x reduces the number of sensor replacements by 75% and improves sensor reliability, allowing operations teams to focus on more value-added duties. T4x assists health and safety managers by eliminating the requirement for each device to be calibrated for the relevant flammable gas because it accurately detects 19 at once, ensuring compliance across the site.

    Being poison resistant and with battery life doubled, operators are more likely to never be without a device.​ T4x reduces the 5-year total cost of ownership by over 25% and saves 12g of lead per detector, making it much easier to recycle at the end of its life and better for the planet.  

    Key Features
    • Extended sensor capabilities
    • Long-life O2 sensor with a 5-year warranty.
    • MPS (molecular property spectrometer) sensor technology that detects over 15 flammable gases in one monitor.
    • Dual toxic sensors (CO and H2S) with a 3 year life
    • 35+ hours of battery life, double the length of the T4
    • Ingress Protection rated IP65 and IP67, water and dust resistant 
    • Crowcon Connect compatible 
    • Triple alarm system 
    Specifications

    Supplied with

    Integrated alligator clip and tethering loop

    Bump/Calibration plate

    Size

    W135 x H80 x D35 mm (5.3 x 3.1 x 1.4in)

    Weight

    282g (9.9oz)

    Sensors

    Gas                                          Range              Resolution

    Long-Life Oxygen (O2)          0-25% Vol.       0.1% Vol.

    Flammable (MPS)                  0-100% LEL     1% LEL

    Hydrogen sulphide (H2S)     0-100ppm        1ppm

    Carbon monoxide (CO)        0-1000ppm      1ppm

    Durability

    Drop tested to 4m onto concrete

    Alarms

    Audible >95dB
    Bright red/blue visual LEDs
    Integrated vibrating alert

    Display

    Front mounted, backlit. Optional 180° flip for easy viewing whilst worn

    Logging

    130 hours of data logging; Up to 3500 events

    Battery

    Rechargeable Li-ion
    18 hour typical runtime
    5.5 hour recharge

    Operating temperature

    -20°C to +55°C (-4°F to +131°F)*

    Humidity

    10 to 95% RH @ 40°C non-condensing

    Ingress protection

    Independently tested to IP65 and IP67

    Approvals

    ATEX and UKEx II 1 G Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +55°C (T4 Type 1) II 2
    G Ex db ia IIC T4 Gb Tamb -20°C to +55°C (T4 Type 2)

    IECEx Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +55°C (T4 Type 1) Ex db ia IIC
    T4 Gb -20°C ≤ Ta ≤ +55°C (T4 Type 2)

    UL Use in hazardous locations Class 1 Div 1 groups
    A,B,C,D only as to intrinsic safety

    INMETRO Ex db ia IIC T4 Gb -20 °C ≤ Ta ≤ +55

    °CMED Directive 2014/90/EU

    Interface

    USB communications lead

    Crowcon Connect Compatible?

    Yes

    Accessories

    (available separately)

    Single unit cradle charger, 10 unit cradle charger; Vehicle charger
    Clip-on filter plate for sensor protection in dusty environments
    I-Test automated bump and calibration station

    Take advantage of our web-exclusive free UK mainland* delivery offer on orders over £100 ex VAT.  See all costs for delivery below and visit our main delivery page for more information on timescales as some restrictions may apply.

    UK & Ireland Delivery Options

    UK Mainland Standard Delivery on orders under £100 ex VAT - £7.95 ex VAT*
    UK Mainland Express Delivery - £21.50 ex VAT (timescales vary – please see delivery page)
    Highlands Delivery - £25.00 ex VAT
    Channel Island Delivery - £40 ex VAT
    Northern Ireland & Republic of Ireland - £25 ex VAT
    Saturday Delivery Options – Please contact us on 0141 771 7749 for more info

    Standard delivery timescales are normally 3-5 working days, depending on stock availability.  Express delivery is normally 1-3 working days, depending on stock availability.  Although we carry an extensive stock, there may be some items that are unavailable due to quantities or otherwise.  In this case we will inform you of the status of your order and whether or not it can be fulfilled within our standard delivery timeframe. *Mainland UK delivery excludes Northern Ireland, other charges apply.

    Please visit our main delivery page for more terms and conditions or contact our Sales Team on 0141 771 7749  or [email protected] for more information. Currently, some manufacturers are facing production and delivery issues due to Brexit and custom clearance and this is affecting lead times of even some of our standard stocked items.  We're trying our best to prevent these issues from affecting orders but please be aware that there may be some delays.  We are aiming to communicate this as best and as early as possible. 

    International Delivery Options

    Delivery costs vary between countries.  Please visit our main delivery page for more information.

    You also have the option to 'Arrange Your Own Courier', whereby you organise the shipment of your own goods once they have reached our warehouse.

    ORDER CANCELLATION AND GOODS RETURN

    Should you wish to cancel an order or return unwanted goods please follow the procedures detailed below to help us ensure cancellations/returns are processed as quickly and efficiently as possible.

    Simply log on to your customer account, note the order reference number and email the full cancellation details to [email protected] or contact us on 0141 771 7749. Assuming the order has not been despatched we will cancel.

    You have the right to cancel the purchase of goods without having to give a reason at any time within the “cooling off period” of fourteen working days, beginning the day after you take delivery of your order.

    You must notify us of your cancellation in writing via email to [email protected] or to our contact address. (Details Here)

    If you are in possession of the goods you are under the duty to retain them and take reasonable care of them.

    You must send the goods back to us in their original condition to our contact address at your own cost (unless we delivered the item to you in error or the item is damaged or defective) as soon as possible once you have cancelled the contract.

    Alternatively we will collect the goods from you which will incur a charge no greater than the actual cost of arranging the collection and shipping. In this case you must make the goods available for collection. We will contact you to make further arrangements.

    We reserve the right to make a charge not exceeding our direct costs of recovering the goods if you do not return the goods or return them at our expense.

    Upon receipt of returned items in satisfactory condition we will arrange a full credit by the same method used to pay for the goods originally. Any credit due will be processed within a maximum of thirty days.

    Note: If you wish to return goods for refund or exchange after 14 days, a re-stocking fee of 20% of the full order total will apply.

    If upon receipt of goods you find them to be faulty, damaged or if you have been incorrectly supplied an item, you should notify us within 24 hours by contacting 0141 771 7749 or [email protected] and quoting your order number and contact details.

    Frontline Safety will arrange uplift of any damaged or wrongly received goods and if on inspection of goods we also find them to be damaged, faulty or incorrectly supplied, we will offer replacement goods or provide a full refund.

    We recommend you inspect all goods prior to signing for and accepting delivery. If there is any visible damage to the outer packaging, ensure goods are sign for as damaged. In instances where it isn’t possible to sign for goods as damaged, these should be signed for as unexamined.


    Note: If your goods happen to develop a fault out with the standard returns period but within supplied warranty period or if you require any additional assistance, please contact us on 0141 771 7749 or email [email protected]

    IMPORTANT INFORMATION

    All postage, handling, customs and duty charges for all returned goods are the responsibility of the customer. We recommend using a fully traceable, insured service as goods are your responsibility while in transit.

    Crowcon T4x Multi-Gas Detector

    The popular T4 Multi-Gas detector from Crowcon Detection Instruments Ltd has upgraded its sensor technology. The T4 (now T4x) portable gas detector's capacity has been considerably enhanced with the addition of new MPSTM and LLO2 sensors and a dual hazardous sensor.

    T4x reduces the number of sensor replacements by 75% and improves sensor reliability, allowing operations teams to focus on more value-added duties. T4x assists health and safety managers by eliminating the requirement for each device to be calibrated for the relevant flammable gas because it accurately detects 19 at once, ensuring compliance across the site.

    Being poison resistant and with battery life doubled, operators are more likely to never be without a device.​ T4x reduces the 5-year total cost of ownership by over 25% and saves 12g of lead per detector, making it much easier to recycle at the end of its life and better for the planet.  

    Key Features
    • Extended sensor capabilities
    • Long-life O2 sensor with a 5-year warranty.
    • MPS (molecular property spectrometer) sensor technology that detects over 15 flammable gases in one monitor.
    • Dual toxic sensors (CO and H2S) with a 3 year life
    • 35+ hours of battery life, double the length of the T4
    • Ingress Protection rated IP65 and IP67, water and dust resistant 
    • Crowcon Connect compatible 
    • Triple alarm system 
    Specifications

    Supplied with

    Integrated alligator clip and tethering loop

    Bump/Calibration plate

    Size

    W135 x H80 x D35 mm (5.3 x 3.1 x 1.4in)

    Weight

    282g (9.9oz)

    Sensors

    Gas                                          Range              Resolution

    Long-Life Oxygen (O2)          0-25% Vol.       0.1% Vol.

    Flammable (MPS)                  0-100% LEL     1% LEL

    Hydrogen sulphide (H2S)     0-100ppm        1ppm

    Carbon monoxide (CO)        0-1000ppm      1ppm

    Durability

    Drop tested to 4m onto concrete

    Alarms

    Audible >95dB
    Bright red/blue visual LEDs
    Integrated vibrating alert

    Display

    Front mounted, backlit. Optional 180° flip for easy viewing whilst worn

    Logging

    130 hours of data logging; Up to 3500 events

    Battery

    Rechargeable Li-ion
    18 hour typical runtime
    5.5 hour recharge

    Operating temperature

    -20°C to +55°C (-4°F to +131°F)*

    Humidity

    10 to 95% RH @ 40°C non-condensing

    Ingress protection

    Independently tested to IP65 and IP67

    Approvals

    ATEX and UKEx II 1 G Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +55°C (T4 Type 1) II 2
    G Ex db ia IIC T4 Gb Tamb -20°C to +55°C (T4 Type 2)

    IECEx Ex ia IIC T4 Ga -20°C ≤ Ta ≤ +55°C (T4 Type 1) Ex db ia IIC
    T4 Gb -20°C ≤ Ta ≤ +55°C (T4 Type 2)

    UL Use in hazardous locations Class 1 Div 1 groups
    A,B,C,D only as to intrinsic safety

    INMETRO Ex db ia IIC T4 Gb -20 °C ≤ Ta ≤ +55

    °CMED Directive 2014/90/EU

    Interface

    USB communications lead

    Crowcon Connect Compatible?

    Yes

    Accessories

    (available separately)

    Single unit cradle charger, 10 unit cradle charger; Vehicle charger
    Clip-on filter plate for sensor protection in dusty environments
    I-Test automated bump and calibration station

    Take advantage of our web-exclusive free UK mainland* delivery offer on orders over £100 ex VAT.  See all costs for delivery below and visit our main delivery page for more information on timescales as some restrictions may apply.

    UK & Ireland Delivery Options

    UK Mainland Standard Delivery on orders under £100 ex VAT - £7.95 ex VAT*
    UK Mainland Express Delivery - £21.50 ex VAT (timescales vary – please see delivery page)
    Highlands Delivery - £25.00 ex VAT
    Channel Island Delivery - £40 ex VAT
    Northern Ireland & Republic of Ireland - £25 ex VAT
    Saturday Delivery Options – Please contact us on 0141 771 7749 for more info

    Standard delivery timescales are normally 3-5 working days, depending on stock availability.  Express delivery is normally 1-3 working days, depending on stock availability.  Although we carry an extensive stock, there may be some items that are unavailable due to quantities or otherwise.  In this case we will inform you of the status of your order and whether or not it can be fulfilled within our standard delivery timeframe. *Mainland UK delivery excludes Northern Ireland, other charges apply.

    Please visit our main delivery page for more terms and conditions or contact our Sales Team on 0141 771 7749  or [email protected] for more information. Currently, some manufacturers are facing production and delivery issues due to Brexit and custom clearance and this is affecting lead times of even some of our standard stocked items.  We're trying our best to prevent these issues from affecting orders but please be aware that there may be some delays.  We are aiming to communicate this as best and as early as possible. 

    International Delivery Options

    Delivery costs vary between countries.  Please visit our main delivery page for more information.

    You also have the option to 'Arrange Your Own Courier', whereby you organise the shipment of your own goods once they have reached our warehouse.

    ORDER CANCELLATION AND GOODS RETURN

    Should you wish to cancel an order or return unwanted goods please follow the procedures detailed below to help us ensure cancellations/returns are processed as quickly and efficiently as possible.

    Simply log on to your customer account, note the order reference number and email the full cancellation details to [email protected] or contact us on 0141 771 7749. Assuming the order has not been despatched we will cancel.

    You have the right to cancel the purchase of goods without having to give a reason at any time within the “cooling off period” of fourteen working days, beginning the day after you take delivery of your order.

    You must notify us of your cancellation in writing via email to [email protected] or to our contact address. (Details Here)

    If you are in possession of the goods you are under the duty to retain them and take reasonable care of them.

    You must send the goods back to us in their original condition to our contact address at your own cost (unless we delivered the item to you in error or the item is damaged or defective) as soon as possible once you have cancelled the contract.

    Alternatively we will collect the goods from you which will incur a charge no greater than the actual cost of arranging the collection and shipping. In this case you must make the goods available for collection. We will contact you to make further arrangements.

    We reserve the right to make a charge not exceeding our direct costs of recovering the goods if you do not return the goods or return them at our expense.

    Upon receipt of returned items in satisfactory condition we will arrange a full credit by the same method used to pay for the goods originally. Any credit due will be processed within a maximum of thirty days.

    Note: If you wish to return goods for refund or exchange after 14 days, a re-stocking fee of 20% of the full order total will apply.

    If upon receipt of goods you find them to be faulty, damaged or if you have been incorrectly supplied an item, you should notify us within 24 hours by contacting 0141 771 7749 or [email protected] and quoting your order number and contact details.

    Frontline Safety will arrange uplift of any damaged or wrongly received goods and if on inspection of goods we also find them to be damaged, faulty or incorrectly supplied, we will offer replacement goods or provide a full refund.

    We recommend you inspect all goods prior to signing for and accepting delivery. If there is any visible damage to the outer packaging, ensure goods are sign for as damaged. In instances where it isn’t possible to sign for goods as damaged, these should be signed for as unexamined.


    Note: If your goods happen to develop a fault out with the standard returns period but within supplied warranty period or if you require any additional assistance, please contact us on 0141 771 7749 or email [email protected]

    IMPORTANT INFORMATION

    All postage, handling, customs and duty charges for all returned goods are the responsibility of the customer. We recommend using a fully traceable, insured service as goods are your responsibility while in transit.