Drager 5820 Alcotest Kit
The Drager Alcotest 5820 is a professional breathalyser which carries out breath alcohol tests quickly and efficiently. This kit includes the Alcotest 5820 device, 3 mouthpieces, 1 battery, a hand loop and a plastic transportation case.
The device is portable and user-friendly, with an easy-to-read LED display. The Alcotest 5820 uses Slide'n'click mouthpieces which are hygienic as they're individually sealed. A spacer also prevents the mouth of the person being tested from coming in to contact with the Alcotest housing.
The mouthpiece can be moved to the left or the right hand side of the instrument and there's only three buttons on the interface so the Alcotest breathalyser is easy to use. Drager's Alcotest can also measure alcohol in the ambient air (passive) without the use of a mouthpiece.
- Replacement mouthpieces available
- Easy to use buttons
- Large, back-lit display
- LED and audible signals to indicate end of measurement process
- Intuitive mouthpiece design allows 'slide'n'click' motion
- Datalogger - stores last 100 tests with test numbers
- Impact resistant ABS/PC housing
Measuring principle |
Electrochemical DrägerSensor in 1/4” technology; alcohol specific |
Measuring range |
0 to 2.5 mg/L; if measurement range limit is exceeded, a message is displayed |
Dimensions (W x H x D), weight |
Approx. 50/60 x 141 x 31 mm / 2"/2.4" x 5.6" x 1.2"; approx. 150g / 0.33 lbs, incl. battery |
IP Rating |
IP54 |
Display of measurement result |
After approx. 3 s (at 0 mg/L); after approx. 10 s (at 0.5 mg/L, room temperature) |
Operating temperature |
-5 to +50 °C / 23 to 122 °F |
Relative humidity |
10 to 100 % relative humidity (non-condensing and in operating state) |
Ambient pressure |
600 to 1,300 hPa / 17.7 to 38.4 inch Hg |
Power supply |
1x CR123A-Battery, charge level indicator in display, with one battery approx. 1,500 breath tests can be done. |
Instrument configuration |
Direct menu-guided configuration of instrument settings (PIN required) No additional PC software needed |
Approvals |
Vibration and shock - EN 60068-2-27, EN 60068-2-6; EN600-2-64 |