Drager Bayonet Pre-Filter Retainer, pack of 14
This pre-filter retainer from Drager Safety is an accessory of full face masks and half face masks which have a bayonet filter connection. Please note that one pack contains 14 pieces (7 pairs).
The retainer itself does not provide any form of filter protection but acts as a cap and holds pre-filters in place.
In order to use the retainers you will require the use of a Drager combination filter and a pre-filter pad. The pre-filter retainer will be used to clip the pre-filter (p/n 6738159) on top of the combination filter to ensure additional protection.
The X-plore 5500 is a full face mask which is compatible with the retainer pad, combination filter and pre-filters. Buy this product now.
- Very lightweight - weighs a mere 12 grams per piece
- View a selection of our bayonet filters by clicking here
- Other compatible masks include the Draeger X-plore 3500 and the X-plore 3300
Colour Code | Filter Type | Contaminants present |
AX 1) |
Gases and vapours of organic compounds with boiling point < 65 °C | |
A |
Gases and vapours of organic compounds with boiling point > 65 °C | |
B |
Inorganic gases and vapours, e.g. chlorine, hydrogen sulphide, hydrogen cyanide | |
E |
Sulphur dioxide, hydrogen chloride | |
K |
Ammonia and organic Ammonia derivates | |
CO 2) |
Carbon monoxide |
|
Hg 3) |
Mercury vapour |
|
NO 4) |
Nitrous Gases including nitrogen monoxide |
|
P |
Particles | |
Reactor5) |
Radioactive iodine including radioactive methyl iodide | |
1) May only be used as supplied from factory. Reuse and use against gas-compounds is absolutely impermissible 2) One time use only. Dispose after use. Special guidelines according to local regulations apply 3) Only use for a max of 50 hours according to EN 14387 4) One time use only. Dispose after use 5) Special guidelines according to local regulations apply |