Drager Bayonet Pure Adapter, pack of 10
The Drager Bayonet Pure Adapter is an accessory of the Drager twin filter face mask range. One pack contains 10 pieces.
The bayonet pure adapter combines gas filters with Drager’s range of Pure particle filters to create a combination filter. The adapter must be placed on top of the gas filter to house the Pure filter.
Buy a range of gas filters on the Frontline Safety website, as well as P2 and P3 Pure filters.
- Use with the Drager X-Plore Bayonet Mask Range
- This includes the X-plore 5500 and the X-plore 3500
Colour Code | Filter Type | Contaminants present |
AX 1) |
Gases and vapours of organic compounds with boiling point < 65 °C | |
A |
Gases and vapours of organic compounds with boiling point > 65 °C | |
B |
Inorganic gases and vapours, e.g. chlorine, hydrogen sulphide, hydrogen cyanide | |
E |
Sulphur dioxide, hydrogen chloride | |
K |
Ammonia and organic Ammonia derivates | |
CO 2) |
Carbon monoxide |
|
Hg 3) |
Mercury vapour |
|
NO 4) |
Nitrous Gases including nitrogen monoxide |
|
P |
Particles | |
Reactor5) |
Radioactive iodine including radioactive methyl iodide | |
1) May only be used as supplied from factory. Reuse and use against gas-compounds is absolutely impermissible 2) One time use only. Dispose after use. Special guidelines according to local regulations apply 3) Only use for a max of 50 hours according to EN 14387 4) One time use only. Dispose after use 5) Special guidelines according to local regulations apply |