Drager Short-Term Detection Tubes - Carbon Disulphide 5/a (Pack of 10)

PRODUCT CODE:: 6728351

These tubes are designed for spot-measurements and must be used with the Drager Accuro Gas Detection Pump. Buy now from Frontline Safety.

£101.96 inc VAT

£84.97

Subscribe to back in stock notification

I have read & accept the Privacy Policy

Product description

Drager Detection Tubes - Carbon Disulphide 5/a (Pack of 10)

These carbon disulphide tubes (5/a) from Drager Safety have a measurement range of 2.5 to 120 ppm. The tubes come in a pack of 10 tubes and have a shelf life of 2 years.

The Drager Gas Detection Pump (Accuro) is compatible with the short-term gas detection tubes. You can purchase this product by clicking here .

Key Features

Reach difficult measurement areas with the tubes, pump and accessories
Carry out measurements on the spot
Measurement results may take between 10 seconds and 15 minutes depending on the type of tube use
Applications for use include variations in concentrations in the workplace, contamination of breathing zones, pre-entry checks and confined space entry

Specification

Application Range
Standard Measuring Range:	5 to 60 ppm
Number of Strokes n:	11
Time for Measurement:	approx. 3 min
Standard Deviation:	± 10 to 15 %
Color Change:	white --> brown green

Ambient Operating Conditions
Temperature:	0 to 40 °C
Absolute Humidity:	3 to 15 mg H2O / L

Reaction Principle
CS2 + I2O5 --> I2

Cross Sensitivity
Aliphatic and aromatic hydrocarbons, carbon monoxide and hydrogen sulfide are indicated, but with different sensitivities. It is impossible to measure carbon disulfide in the presence of these substances.

Additional Information
These tubes become very warm during the measurement. Therefore this Dräger-Tube shall not be used in potentially combustible atmospheres. The lower explosion limit for carbon disulfide is 1 vol. %.