Drager Short Term Detection Tubes - Hydrochloric Acid 0.2/a (Pack of 10)

PRODUCT CODE:: 8103481

These tubes are designed for spot-measurements and must be used with the Drager Accuro Gas Detection Pump. Buy now from Frontline Safety.

£108.26 inc VAT

£90.22

Subscribe to back in stock notification

I have read & accept the Privacy Policy

Product description

Drager Detection Tubes - Hydrochloric Acid 0.2/a (Pack of 10)

The Drager short-term detection are a cost-effective way of measuring substances such as Hydrochloric Acid (0.2/a). These particular tubes have a measurement range 0.2 to 3 ppm.

The Drager Gas Detection Pump (Accuro) is compatible with the short-term gas detection tubes. You can purchase this product by clicking here .

Key Features

Hard-to-reach places can be accessed and measured using various compatible accessories
Excellent for on-the-spot measurements
10 seconds to 15 minutes is the time frame for readings and is totally dependent on the tube type
Suitable applications include pre-entry checks, confined space entry, variations in concentration levels and also contamination of breathing areas are amongst a number of potential of applications

Specification

Application Range
Standard Measuring Range:	0.2 to 3 ppm / 3 to 20 ppm
Number of Strokes n:	10 / 2
Time for Measurement:	approx. 2 min / 0.4 min
Standard Deviation:	± 10 to 15 %
Color Change:	blue --> yellow

Ambient Operating Conditions
Temperature:	5 to 40 °C
Absolute Humidity:	≤ 15 mg H2O / L

Reaction Principle
HCl + bromophenol blue --> yellow reaction product

Cross Sensitivity
No interference on the reading of 10 ppm H2S and 2 ppm SO2. Other acid gases are also indicated, however, with differing sensitivity. Chlorine changes the indicating layer to grey. If chlorine occurs simultaneously, HCl readings will be higher.