Drager Short Term Detection Tubes - Methanol 20/a (Pack of 10)

PRODUCT CODE:
8103801

These tubes are designed for spot-measurements and must be used with the Drager Accuro Gas Detection Pump. Buy now from Frontline Safety.

Please note this product is currently discontinued.

Loading...

Product description

Drager Detection Tubes Methanol 20/a (Pack of 10)

Drager's methanol short-term gas detection tubes come in a pack of 10 and are used to detect levels of methanol in the air.

These tubes can be used for on-spot measurements and must be used in conjunction with the Drager Accuro Gas Detection Pump.  This manual bellows pump is also available to purchase on the Frontline Safety website.

Cross Sensitivities

  • The tube does not differentiate between different alcohols.
  • Higher molecular alcohols are indicated with significantly decreasing sensitivity
  • Ethers and xylene are indicated as well, but with different sensitivity
  • ≤ 25 ppm formaldehyde, ≤ 50 ppm acetaldehyde, and ≤ 50 ppm toluene are not indicated
  • Aliphatic petroleum hydrocarbons, ketones, esters, halogenated hydrocarbons and benzene are not indicated

Key Features

  • Reach difficult measurement areas with the tubes, pump and accessories
  • Carry out measurements on the spot
  • Measurement results may take between 10 seconds and 15 minutes depending on the type of tube used
  • Applications for use include variations in concentrations in the workplace, contamination of breathing zones, pre-entry checks and confined space entry
Specification
Application Range 
Standard Measuring Range:
  • 20 to 2500 ppm
  • 200 to 5000 ppm
Standard Deviation: ± 10 to 25% 
Number of Strokes
  • 15
  • 5
Measuring Time
  • Approx. 6 mins
  • Approx. 2 mins
Colour Change

Yellow --> Mint Green

Reviews
Product Questions