Drager Detection Tubes - Hexane 10/a (Pack of 10)

PRODUCT CODE:: 6728391

These tubes are designed for spot-measurements and must be used with the Drager Accuro Gas Detection Pump. Buy now from Frontline Safety.

Please note this product is currently discontinued.

Subscribe to back in stock notification

I have read & accept the Privacy Policy

Product description

Drager Detection Tubes -Hexane 10/a 10-2500ppm (Pack of 10)

Drager Safety provide short-term detection tubes as a means of measuring certain gases. These particular tubes are n-Hexane (100/a) and have a measurement range of 200 to 600 ppm. Other detectable substances include heptane.

Please note the tubes have a shelf life of 2 years and come in a pack containing 10 tubes.

Click here to view more information on the compatible Drager Accuro Gas Detection Pump for short-term detection tubes.

Key Features

Reach difficult measurement areas with the tubes, pump and accessories
Carry out measurements on the spot
Measurement results may take between 10 seconds and 15 minutes depending on the type of tube used
Applications for use include variations in concentrations in the workplace, contamination of breathing zones, pre-entry checks and confined space entry

Specification

Application Range
Standard Measuring Range:	10 to 2,500 ppm
Number of Strokes n:	6
Time for Measurement:	approx. 3 min
Standard Deviation:	± 15 to 20 %
Color Change:	orange --> green-brown

Ambient Operating Conditions
Temperature:	15 to 35 °C
Absolute Humidity:	5 to 12 mg H2O / L

Reaction Principle
C6H14 + CrVI --> CrIII + various oxidation products

Cross Sensitivity
Alcohols, esters, aromatics, petroleum hydrocarbons and ethers are also indicated, but with different sensitivities. It is impossible to differentiate between them.

Extension of the Measuring Range
Using n = 11, divide the reading by 2; the measuring range will be 50 to 1,500 ppm.