Drager Short Term Detection Tubes - Petroleum Hydrocarbons 100/a (Pack of 10)

PRODUCT CODE:: 6730201

These tubes are designed for spot-measurements and must be used with the Drager Accuro Gas Detection Pump. Buy now from Frontline Safety.

£85.55 inc VAT

£71.29

Subscribe to back in stock notification

I have read & accept the Privacy Policy

Product description

Drager Detection Tubes - Petroleum Hydrocarbons 100/a (Pack of 10)

These Drager short-term detection tubes are for petroleum hydrocarbons and have a measurement range of 100 – 2500 ppm for n-octane.

Other substances may include Acetylene, Bromomethane, i-Butane, Exxsol D40, Gasoline, Heptane, Isopar G, Isopentane, Kerosene, n-Nonane, i-Octane, n-Octane, Shellsol, Turpentine Oil, White Spirit.

Please note this product has a shelf life of 2 years and comes in a pack of 10 tubes.

Key Features

Reach difficult measurement areas with the tubes, pump and accessories
Carry out measurements on the spot
Measurement results may take between 10 seconds and 15 minutes depending on the type of tube used
Applications for use include variations in concentrations in the workplace, contamination of breathing zones, pre-entry checks and confined space entry

Specification

Application Range
Standard Measuring Range:	100 to 2,500 ppm for n-octane
Number of Strokes n:	2
Time for Measurement:	approx. 30 s
Standard Deviation:	± 10 to 15 %
Color Change:	white --> green

Ambient Operating Conditions
Temperature:	0 to 40 °C
Absolute Humidity:	< 30 mg H2O / L

Reaction Principle
C8H18 + I2O5 --> I2

Cross Sensitivity
Many other petroleum hydrocarbons are indicated as well, but with different sensitivities. It is impossible to differentiate between them. Aromatics are indicated, but only with low sensitivities. Carbon monoxide is indicated in comparable concentrations with about half the sensitivity.