Drager Short Term Detection Tubes - Trichloroethylene 2/a (Pack of 10)

PRODUCT CODE:
6728541

These tubes are designed for spot-measurements and must be used with the Drager Accuro Gas Detection Pump. Buy now from Frontline Safety.

£88.26 inc VAT
£73.55
Loading...

Product description

Drager Detection Tubes - Trichloroethylene 2/a (Pack of 10)

The Drager short-term detection tubes are both reliable and cost-effective.  These particular tubes measure trichloroethylene (2/a) and have a measurement range of 2 to 250 ppm.

Please note the tubes come in a pack of 10 and have a shelf life of 2 years.

Buy the Drager Accuro Gas Detection Pump by clicking here .  This is required for the use of short-term gas detection tube.

Key Features

  • Reach difficult measurement areas with the tubes, pump and accessories
  • Carry out measurements on the spot
  • Measurement results may take between 10 seconds and 15 minutes depending on the type of tube used
  • Applications for use include variations in concentrations in the workplace, contamination of breathing zones, pre-entry checks and confined space entry
Specification
Application Range  
Standard Measuring Range: 20 to 250 ppm / 2 to 50 ppm
Number of Strokes n: 3 / 5
Time for Measurement: approx. 1.5 min / 2.5 min
Standard Deviation: ± 10 to 15 %
Color Change: pale grey --> orange
   
Ambient Operating Conditions  
Temperature: 10 to 40 °C
Absolute Humidity: 5 to 15 mg H2O / L
   
Reaction Principle  
Cl2 + o-tolidine --> orange reaction product
 
Cross Sensitivity
Other chlorinated hydrocarbons are indicated, but with different sensitivities. Free halogens and hydrogen halides in the TLV range are also indicated. It is impossible to measure trichloroethylene in the presence of these substances. Petroleum hydrocarbons cause low readings.
Reviews
Product Questions