Drager Nitrous Oxide Sampler (Pack of 10)

PRODUCT CODE:
8101472
Please note: this product is now obsolete.

Please note this product is currently discontinued.

Loading...

Product description

Drager Nitrous Oxide Sampler

Please note: this product is now obsolete.

Drager Nitrous Oxide Sampler: Passive Sampling Tubes - Nitrous Oxide Sampler, packet of 10 including 2 holders.

NOTE: This product has a shelf life of 2 years.

Advice for sample-taking

The sampling time of nitrous-oxide diffusion sampler depends on the expected oxide nitrous concentration in the air to be analysed.  The following sampling times are recommended in the case of measurements in the range of 5 to 100 mL/m3 (ppm) nitrous oxide:

Nitrous Oxide Concentration Recommended Sampling Time
5 ppm 4 to 8 h
25 ppm 1 to 8 h
50 ppm

30 min to 8 h

100 ppm 15 min to 8 h

 

After sampling the tube must be sealed with the polyethylene supplied caps.

Note concerning the analysis

The analysis is made according to DFG method No. 2"Dinitrogen monoxide" via thermodesorption and infrared spectroscopy. 

 

Specification
Application Range
Adsorbate: nitrous oxide (laughing gas)
Sorption Agent: molecular sieve
Adsorption Layer: 400 mg
Adsorption Capacity: 120 μg
Diffusion Rate: 0.03 μg/ppm x h
Sampling Rate: 0.27 mL/min
Standard Range of Measurement: 2.5 to 500 ppm
Sampling Period: 15 min to 8 hours
Tube Length: 115 mm
Outside Diameter: 7 mm
Inside Diameter: 5 mm
   
Permissable Ambient Conditions 
Temperature: 5 to 35°C
Moisture: below 20 mg/L H2O
Atmospheric Pressure: below 1050 hPa
Air Velocity: at least 1 cm/s
   
   
   
Reviews
Product Questions