Drager Short Term Detection Tubes - Hydrogen 0.5%/a (Pack of 10)

PRODUCT CODE:
CH30901

These tubes are designed for spot-measurements and must be used with the Drager Accuro Gas Detection Pump. Buy now from Frontline Safety.

£107.38 inc VAT
£89.48
Loading...

Product description

Drager Short Term Detection Tubes - Hydrogen 0.5%/a (Pack of 10)

Drager short-term detection tubes – suitable for Hydrogen (0.5%/a) with a measurement range of 0.5 to 3 vol. %.

They have a shelf life of 2 years and come in a pack of 10 tubes.

The Accuro Gas Detection Pump from Draeger Safety is required to use short-term gas detection tubes.  View more information on this product by clicking here .

Key Features

  • Designed for short-term, on-the-spot measurement
  • Can take between 10 seconds to 15 minutes to gather a reading
  • Applications may include concentration fluctuations in the workplace, measurement of contaminants in breathing zone, and confined spaces
  • Can be used as pre-entry checks
Specification
Application Range 
Standard Measuring Range: 0.5 to 3 vol. %
Number of Strokes n: 5
Time for Measurement: approx. 1 min
Standard Deviation: ± 10 to 15 %
Color Change: yellow/green - pink
   
Ambient Operating Conditions 
Temperature: 5 to 40 °C
Absolute Humidity: < 30 mg H2O / L
   
Reaction Principle 
a) H2 + 1⁄2 O2 - H2O
b) H2O + SeO2 + H2SO4 - pink reaction product
 
Cross Sensitivity
Up to 1,000 ppm CO has no influence on the indication; higher concentrations lead to lower measurement results. Acetylene and alcohols react similarly to hydrogen.
 
Additional Information
Do not use in potentially explosive areas. Qualify before use with a combustible gas monitor. When the hydrogen concentration is above 3 vol. % the catalysis layer heats up during the measurement with a reddish glow. Determination of hydrogen in air with at least 5 vol. % O2.
Reviews
Product Questions