Drager Special Filter 1140 Reactor P3 R D (incineratable)
This Drager Special Filter 1140 P3 R D is part of a range Reactor filters from Drager Safety.
The marking D indicates that the filter has successfully passed dolomite test. 'R' indicates that the filter is reusable or offers protection for more than one work shift. However, it is important to be aware of any signs that suggest the filter is coming to its end of service life.
Being a P3 filter means that it's 99.95% efficient in filtering out dust and particulates.
- CE approved (EN 141:2000 re. EN 14387, EN 143:2000, EN 371)
- SAI Global-approved (Australia)
Colour Code | Filter Type | Contaminants present |
AX 1) |
Gases and vapours of organic compounds with boiling point < 65 °C | |
A |
Gases and vapours of organic compounds with boiling point > 65 °C | |
B |
Inorganic gases and vapours, e.g. chlorine, hydrogen sulphide, hydrogen cyanide | |
E |
Sulphur dioxide, hydrogen chloride | |
K |
Ammonia and organic Ammonia derivates | |
CO 2) |
Carbon monoxide |
|
Hg 3) |
Mercury vapour |
|
NO 4) |
Nitrous Gases including nitrogen monoxide |
|
P |
Particles | |
Reactor5) |
Radioactive iodine including radioactive methyl iodide | |
1) May only be used as supplied from factory. Reuse and use against gas-compounds is absolutely impermissible 2) One time use only. Dispose after use. Special guidelines according to local regulations apply 3) Only use for a max of 50 hours according to EN 14387 4) One time use only. Dispose after use 5) Special guidelines according to local regulations apply |