Drager X-am 2500 Gas Detection Kit Ex/O2

PRODUCT CODE:: 3360228

£1,105.85 inc VAT

£921.54

Subscribe to back in stock notification

I have read & accept the Privacy Policy

Product description

Drager X-am 2500 Gas Detection Kit Ex/O2, with Power Pack & Charger

The X-am 2500 is a specially developed multi gas detector from Drager. It’s ideal for use in applications such as industrial work, mining and refineries. This particular model features an O2 Oxygen sensor and a combustible gas Ex sensor which has a high resistance to silicone and hydrogen sulphide.

The monitor has the ability to detect up to four different gases and houses durable electrochemical sensors which offer high performance.

Have confidence that the X-am 2500 will safely detect combustible gases and oxygen depletion in environments subject to explosive atmospheres. You can also attach the detector to your clothing using the robust, integrated crocodile clip.

Also available from Frontline Safety are the Drager Bump Test Station and X-dock testing and calibration station . These can be used with the X-am 2500 to carry out functional tests and bump tests. To configure your Drager X-am 2500 you'll need the Drager USB Dira with USB cable and the Drager Calibration Cradle to assist with connecting to the USB. Both items can be found in our related products section above on the Frontline Safety website.

Key Features

No sensitivity to electromagnetic radiation or wireless devices
> 1000 h of data can be recorded with 4 gases at a recording interval of 1 value per minute
Results from datalogging are retrievable using an infrared interface
Most sensors offer a long service life
External pump available for leak detection in clearance measurements for tanks or shafts
Switching from diffusion mode to pumped mode can be done quickly and easily without tools
Easy menu navigation and simple two-button control panel

Specification

Range (ppm)	0 to 100% LEL 0 to 5 Vol. -% CH4 0 to 25 Vol. -% O2
Resolution (ppm)	1% LEL 0.1 Vol.-% - O2
Response Time (T90)	10 sec.
Dimensions	48 x 130 x 44 mm; 1.89 x 5.12 x 1.73 in.
Weight	220 - 250 g; 7.8 - 8.8 oz.
Ambient Conditions	Temperature: -20 - +50 °C Pressure: 700 - 1300 mbar Humidity: 10 - 95% r.h.
Battery Life	>12 h (alkaline and NiMH), >13 h with NiMH HC, > 250 h w/o Ex Sensor with alkaline batteries (typical at 25° C)
Charging Time	< 4 hrs
IP Rating	IP 67 – water and dust resistant
Alarms	Visual (360°) Audible (multi-tone >90 dB at 30cm) Vibrating
Expected Service Life	CatEx - >4 years O2 - >5 years
Warranty	3 years for instrument and sensors
Certifications	ATEX I M1 Ex ia I Ma, II 1G Ex ia IIC T3 Ga, I M2 Ex d ia I Mb, II 2G Ex d ia IIC T4/T3 Gb EN 60079-29-1:2007 (Methane to Nonane); EN 50104 (2002)+A1(2004) O2; EN 45544 CO & H2S; EN 50271:2001 (Software and Documentation) CSA Class I Div. 1 Group A, B, C, D T.-Code T4/T3; A/Ex ia IIC T3 /Ga; A/Ex d ia IIC T4/T3 /Gb IECEx Ex ia I Ma; Ex ia IIC T3 Ga; Ex d ia I Mb; Ex d ia IIC T4/T3 Gb CE-mark Electromagnetic Compatibility (Directive 2004/108/EC); ATEX (Directive 94/9/EC) MED Marine Equipment Directive 96/98/EC
What's Included	Drager X-am 2500 Monitor with specified sensors Crocodile clip NiMH rechargeable power pack and charger Operation and Maintenance manual