Drager X-am 5000 Gas Detection Kit CatEx, O2, Dual CO/H2S, Cl2
This Drager X-am 5000 features a combustible gas Ex sensor, an O2 oxygen sensor, a combined carbon monoxide and hydrogen sulphide sensor and also a chlorine sensor. It’s ideal for personal monitoring applications and use in explosive atmospheres.
It is a multi-gas detector with the ability to monitor up to five gases. The tough rubber housing shock-proof sensors make it a robust and reliable instrument.
The Ex sensor in particular has a high level of sensitivity and resistance against sensor poisons such as silicone and hydrogen sulphide.
The X-zone 5000 can be used in alongside the X-am 5000 for area monitoring applications and the Drager Bump Test Station and X-dock testing and calibration station can both be used to carry out functional tests and bump tests.
- Resistant to electromagnetic interference
- External pump available for pre-entry checks into confined spaces
- Retro-reflective label makes it easy to see
- Large display
- Energy save mode increases operating time to > 40 hours
- Datalogging capability >1000 hours with 5 gases and a recording interval of 1 value per minute
- Results can be read out via Infrared
- Gas inlets are featured at the top and bottom of the device
Range (ppm) |
|
Resolution (ppm) |
|
Response Time (T90) |
|
Dimensions | 48 x 130 x 44 mm; 1.89 x 5.12 x 1.73 in. |
Weight | 220 - 250 g; 7.8 - 8.8 oz. |
Ambient Conditions |
|
Operating Time | >12 hours (without Ex sensor > 700 hours), >40 hours – save energy mode |
Charging Time | < 4 hrs |
IP Rating | IP 67 – water and dust resistant |
Alarms |
|
Certifications |
|
What's Included |
|