Drager X-am 5000 Gas Detection Kit CatEx, O2, Dual CO/H2S, SO2
The Drager X-am 5000 is ideal for personal monitoring applications and can be used in potentially explosive atmospheres. This particular monitor features a combustible gas Ex sensor, a combined carbon monoxide and hydrogen sulphide sensor, a sulphur dioxide sensor and also an O2 oxygen sensor.
It has the ability to detect up to five gases using XXS sensors. The catalytic Ex sensor has a high level of sensitivity and resistance against sensor poisons such as silicone and hydrogen sulphide.
Have confidence that your monitor will be able to withstand tough conditions and safely detect O2 depletion, CO, H2S and SO2 with its rubber housing and shock-proof sensors.
The X-zone 5000 can be used alongside the X-am 5000 for area monitoring applications and the Drager Bump Test Station and X-dock testing and calibration station can both be used to carry out functional tests and bump tests.
- Resistant to electromagnetic interference
- External pump available for pre-entry checks into confined spaces
- Retro-reflective label makes it easy to see
- Large and clear display
- Energy save mode can increase operating time to > 40 hours
- Datalogging capability – can be read out via Infrared
- >1000 hours with 5 gases and a recording interval of 1 value per minute
- Gas inlets featured at the top and bottom of the device
Range (ppm) |
|
Resolution (ppm) |
|
Response Time (T90) |
|
Dimensions | 48 x 130 x 44 mm; 1.89 x 5.12 x 1.73 in. |
Weight | 220 - 250 g; 7.8 - 8.8 oz. |
Ambient Conditions |
|
Operating Time | >12 hours (without Ex sensor > 700 hours), >40 hours – save energy mode |
Charging Time | < 4 hrs |
IP Rating | IP 67 – water and dust resistant |
Alarms |
|
Certifications |
|
What's Included |
|