Drager X-am 5600 Gas Detection Kit with External Pump, CO2, O2, CO, H2S
The Drager X-am 5600 is a small personal gas detector which can monitor up to six gases. It’s ideal for personal monitoring applications and for use in tough industrial environments.
This particular monitor features the following sensors: IR CO2 (provides safe and exact measurements), oxygen O2, carbon monoxide CO and hydrogen sulphide H2S.
The durable infrared sensors used have high stability and a resistance to contamination. They can generally be used for up to eight years.
System extensions for the X-am 5600 include the X-zone 5000 (for area monitoring), Drager CC-Vision software and the Drager Bump Test Station and X-dock testing and calibration station.
- Robust, water-tight detector with integrated rubber boot
- Simple two-button control panel
- External pump available for pre-entry measurements
- Retro reflector label – easy to find in dark or in water
- Large display shows readings at a glance
- Datalogging capability – read out via infrared > 1000 h with 6 gases/recording interval of 1 value per minute
- Gas inlets featured at the upper side and front side of the instrument
Range (ppm) |
|
Resolution (ppm) |
|
Response Time (T90) |
|
Dimensions | 47 x 130 x 44 mm; 1.85 x 5.12 x 1.73 in. |
Weight | 250 g; 8.8 oz. |
Ambient Conditions |
|
Operating Time | ~ 10 h or rather ~12 h |
Charging Time | < 4 hrs |
IP Rating | IP 67 – water and dust resistant |
Alarms |
|
Pump Operation | Maximum hose length 30m; 98 ft |
Calibration | Sensor calibration – every 12 months |
Certifications |
|
What's Included |
|