Drager X-am 5600 Gas Detection Kit IR CO2/O2

PRODUCT CODE:: 3359314

£2,711.41 inc VAT

£2,259.51

Additional services

Traceable Certificate of Calibration for a Multi Gas Monitor

Qty

£50.00

Gas detection equipment requires service and calibration every 6 months. In acknowledgement of this we are offering you your first calibration at a special rate.

Subscribe to back in stock notification

I have read & accept the Privacy Policy

Product description

Drager X-am 5600 Gas Detection Kit IR CO2/O2

The X-am 5600 is small, multi gas detector from Drager. It’s ideal for personal monitoring applications and use in tough industrial environments.

It has the ability to monitor up to six gases and this particular detector features an infrared carbon dioxide sensor as well as an oxygen O2 sensor.

The IR sensors boast high stability and a resistance to contamination and can generally be used for up to eight years.

Equipment extensions for the X-am 5600 include the X-zone 5000 (for area monitoring applications), Drager CC-Vision PC software and the Drager Bump Test Station and X-dock testing and calibration station .

Key Features

Water-tight detector: robust with integrated rubber boot
Easy to use two-button control panel
Retro-reflective label – easy to find in dark conditions
Large and clear display
Datalogging capability – read out via infrared > 1000 h with 6 gases/recording interval of 1 value per minute
Gas inlets are featured on the upper side and the front side of the monitor

Specification

Range (ppm)	0 – 5 Vol.-% CO2 0 – 25 Vol.-% O2
Resolution (ppm)	0.01 Vol.-% CO2 0.1 Vol.-% O2
Response Time (T90)	10 sec (O2) 20 sec (IR CO2)
Dimensions	47 x 130 x 44 mm; 1.85 x 5.12 x 1.73 in.
Weight	250 g; 8.8 oz.
Ambient Conditions	Temperature: -20 - +50 °C Pressure: 700 - 1300 mbar, 20.7 to 38.4” Hg Humidity: 10 - 95% r.h.
Operating Time	~ 10 h or rather ~12 h
Charging Time	< 4 hrs
IP Rating	IP 67 – water and dust resistant
Alarms	Visual (360°) Audible (multi-tone >90 dB at 30cm) Vibrating
Pump Operation	Maximum hose length 30m; 98 ft
Calibration	Sensor calibration – every 12 months
Certifications	ATEX – I M1 Ex ia I MA, II 1G Ex ia IIC T4/T3 (Ga) EN 50104 (2002) + A1 (2004) O2, EN 45544 CO, CO2 & H2S, EN 60079-29-1:2007 Methane, Propane, Nonane, EN 50271:2001 Software and documentation IEC – Ex ia I Ma, Ex ia IIC T4/T3 Ga for MQG 01**, MED – Marine Equipment Directive (Directive 96/98/EC) CSA C US – Div.1, Class I, Groups A, B, C, D T4/T3, A/Ex ia IIC T4/T3/Ga
What's Included	Drager X-am 5600 Monitor with specified sensors Crocodile clip NiMH rechargeable power pack and charger Operation and Maintenance manual