Drager X-am 5600 Gas Detection Kit IREX/O2/CO&H2S

PRODUCT CODE:
DRA-3359313
Drager X-am 5600 Gas Detection Kit IREX/O2/CO&H2S
£2,820.00 inc VAT
£2,350.00

Additional services

  • £50.00
Gas detection equipment requires service and calibration every 6 months. In acknowledgement of this we are offering you your first calibration at a special rate.
Loading...

Product description

Drager X-am 5600 Gas Detection Kit IREX, O2, Dual CO/H2S

The Drager X-am 5600 is a small and reliable multi gas detector.  It’s ideal for personal monitoring applications and use in tough environments

It has the ability to measure up to 6 gases.  This monitor in particular is able to detect explosive, combustible hydrocarbons in the range of the lower explosive limit, carbon monoxide hydrogen sulphide and also oxygen.

Additional equipment, suitable for use with the X-am 5600 includes the X-zone 5000 (for area monitoring applications), Drager CC-Vision PC software and the Drager Bump Test Station and X-dock testing and calibration station .

 

Key Features

  • Water-tight, robust detector with integrated rubber boot
  • Simple two-button control panel
  • Retro-reflective labels – easy to find monitor
  • Large display shows clear readings
  • Datalogging capability – read out via infrared > 1000 h with 6 gases/recording interval of 1 value per minute
  • Gas inlets are featured on the upper side and front side of the instrument
Specification
Range (ppm)
  • 0 -100% LEL
  • 0 – 100 Vol.-% Methane, Propane, Ethylene
  • 0 – 25 Vol.-% O2
  • 0 – 2000 ppm CO
  • 0 – 200 ppm H2S
Resolution (ppm)
  • 1% LEL
  • 0.1 Vol.-% CH4
  • 0.1 Vol.-% O2
  • 2 ppm CO
  • 1 ppm H2S
Response Time (T90)
  • 10 sec O2
  • 15 sec CO & H2S
  • 20 sec IREx
Dimensions 47 x 130 x 44 mm; 1.85 x 5.12 x 1.73 in.
Weight 250 g; 8.8 oz.
Ambient Conditions
  • Temperature: -20 - +50 °C
  • Pressure: 700 - 1300 mbar, 20.7 to 38.4” Hg
  • Humidity: 10 - 95% r.h.
Operating Time ~ 10 h or rather ~12 h
Charging Time  < 4 hrs
IP Rating IP 67 – water and dust resistant
Alarms
  • Visual (360°)
  • Audible (multi-tone >90 dB at 30cm)
  • Vibrating
Pump Operation Maximum hose length 30m; 98 ft
Calibration Sensor calibration – every 12 months
Certifications 
  • ATEX – I M1 Ex ia I MA, II 1G Ex ia IIC T4/T3 (Ga)
  • EN 50104 (2002) + A1 (2004) O2, EN 45544 CO, CO2 & H2S, EN 60079-29-1:2007 Methane, Propane, Nonane, EN 50271:2001 Software and documentation
  • IEC – Ex ia I Ma, Ex ia IIC T4/T3 Ga for MQG 01**, MED – Marine Equipment Directive (Directive 96/98/EC)
  • CSA C US – Div.1, Class I, Groups A, B, C, D T4/T3, A/Ex ia IIC T4/T3/Ga
What's Included
  • Drager X-am 5600 Monitor with specified sensors
  • Crocodile clip
  • NiMH rechargeable power pack and charger
  • Operation and Maintenance manual
Downloads
Reviews
Product Questions