Drager X-am 8000 Multi Gas Detector

Product Code - DRAGER-X-AM-8000

Configure your Drager X-am 8000 to detect up to 7 gases

Prices start from £1,015.91 - add your required sensors

The Drager X-am 8000 is a multi gas detector that's capable of detecting up to 7 gases.  The unit can be placed in either pump or diffusion mode which makes it suitable for confined space applications.

The X-am 8000 can house 5 sensors for gases including LEL, IR LEL, CO2, VOC (PID), O2, CO, H2S, NO, NO2, SO2, PH3, HCN, CL2 and H2 amongst others.  Using a pre-tube, the X-am 8000 can be used for benzene-specific measurements and also provides assistance for clearance measurements and leak detection.  The glowing green D-light (which is optional) can be used to indicate that the X-am is test and ready for use.

The pump in the X-am 8000 is very powerful and can be connected with hoes of up to 45 metres in length.  The pump adapter will allow the use to switch between pump and diffusion mode.  This provides the advantage of only needing to operate the pump when it's actually needed, thus saving energy and reducing wear and tear.

exc VAT £1,015.91 inc VAT £1,219.09

Availability: Out of stock

Need pricing or availability on this product?

Enquire Now

Additional Information

Easy-to-read colour display with zoom function

Inductive charging

Optional Bluetooth module allows connection to the CSE Connect App (FOR ANDROID)

Smart Assistant calculates the necessary flooding time for the X-am and probe

Traffic light system alerts the user to various issues (i.e. gas, low battery)

Durable two-component housing

High contrast colour display

Triple alarm system (audible, visual, vibrating)

IP67 Rated

12MB of storage

Additional accessories available

Specification

Measuring Ranges

See Datasheet for measuring ranges and resolutions

Size

179 x 77 x 42 mm

Weight

Approx. 550g (depending on sensor configuration) with pump

Temperature

-20° C to 50° C

Relative Humidity

10 to 90% (short-term up to 95%) r.h.

Pressure

700 to 1300 hPa

Energy Supply

Lithium-ion battery, rechargeable, inductive charging

Operating Times (Diffusion)

  • with CatEx + 3 EC sensors - typically 24 hours
  • With IR + 3 EC Sensors - typically 22 hours
  • With 3 EC Sensors - typically 120 hours
  • With CatEx, PID + 3 EC sensors - 17 hours
  • With IR, PID + 3 EC sensors - 16 hours
  • With CatEx, IR- + EC sensors - 14 hours
  • PID only - Typically 42 hours

Charging Time

 Typically 4 hours after use during a shift of max. 10 hours

Start-up Times

Typically <60 seconds for standard sensors

Approvals

  • ATEX - I M1, II 1G, Ex da ia I Ma, Ex da ia IIC T4 Ga
  • EAC - PO Ex da ia I Ma X, Ex da ia IIC T4 Ga X
  • CE labelling
  • See datasheet for additional approvals

Warranty

  • Instrument: 3 years
  • Power Supply: 1 year
  • Sensors: see DrägerSensor ® & Portable Instruments Handbook

Related Blog Post

Check out the Frontline Safety Blog

Our blog has lots of helpful content including the following guides:

  • - Step-by-step instructions

  • - Videos

  • - Top 5 things you need to know

  • - How to...

These guides cover a wide range of applications and products.

Product Video

Can we assist with any further information?

Frontline Safety Customer Reviews