Drager X-plore 8000 Premium Hoods for Powered Air Respirator
The Drager X-plore 8000 Premium Hood is suitable for use with the X-plore powered air-purifying respirators 8500 and 8700. The premium hood is available to choose from in a size S/M or a size L/XL. These sizes are also available in a short or long length.
Both the short and long length hoods have different purposes and benefits. You’ll find with the short version that your head and face will be covered; however, your ears will be left uncovered which is good for communication purposes. The long version has a dual-layer neck guard that’s designed to provide additional safety when it’s worn alongside a chemical protection suit. The premium long length hood will offer full protection for the head, face and neck.
Both premium versions of the X-plore hood provide an unrestricted field of view and both can be cleaned and disinfectant. They’re made from a reusable, oil and water-repellent material.
A high level of protection is offered by the X-plore 8000 hoods (approved to TH3) and will protect both your respirator system and face. They’re designed with the highest comfort levels in mind and will offer a stable fit, even if the user intends to move around a lot.
- Wind deflector leads air away from your head, avoids focusing on a single spot
- Spacer on top hood to define curvature of visor
- Offers low distortion
- Made from a soft, low-noise material
- Sweatband in the forehead area is removeable
- Hose connection situated at the back of the hood
- Adjustable strap in the neck area and above the head (head harness)
- Other headpieces are available including hoods, helmets, visors and masks
Part Numbers |
Short (S/M) - R59840 |
Hood Material |
Premium hoods: PA, PU-coated |
Visor Material |
Polycarbonate |
Size |
S/M: Scope 52 cm up to 59 cm |
Weight |
Premium Short Hoods: approx. 200 g |
Temperature Range (Operation) |
-10 °C to +60 °C |
Air Outlet |
Permeable material in the chin area |
Approval |
Respiratory Protection
Eye Protection
|