large image
Over 6000 products
Loading...
PRODUCT CODE
DRAGER-XAM5600-KIT
The Drager X-am 5600 is a multi gas detection kit, capable of monitoring up to 5 gases. This includes LEL, CO, O2 and H2S.

* Required Fields

    £1,927.66 £1,606.38

     

    Additional services

    • £50.00
    Gas detection equipment requires service and calibration every 6 months. In acknowledgement of this we are offering you your first calibration at a special rate.

    Drager X-am 5600 Gas Detection Kit

    Drager X-am 5600 Gas Detection Kit IREX, O2, Dual CO/H2S

    The Drager X-am 5600 is a small and reliable multi gas detector.  It’s ideal for personal monitoring applications and use in tough environments

    It has the ability to measure up to 6 gases.  This monitor in particular is able to detect explosive, combustible hydrocarbons in the range of the lower explosive limit, carbon monoxide hydrogen sulphide and also oxygen.

    Additional equipment, suitable for use with the X-am 5600 includes the X-zone 5000 (for area monitoring applications), Drager CC-Vision PC software and the Drager Bump Test Station and X-dock testing and calibration station.

     

    Key Features
    • Water-tight, robust detector with integrated rubber boot
    • Simple two-button control panel
    • Retro-reflective labels – easy to find monitor
    • Large display shows clear readings
    • Datalogging capability – read out via infrared > 1000 h with 6 gases/recording interval of 1 value per minute
    • Gas inlets are featured on the upper side and front side of the instrument
    Specifications
    Range (ppm)
    • 0 -100% LEL
    • 0 – 100 Vol.-% Methane, Propane, Ethylene
    • 0 – 25 Vol.-% O2
    • 0 – 2000 ppm CO
    • 0 – 200 ppm H2S
    Resolution (ppm)
    • 1% LEL
    • 0.1 Vol.-% CH4
    • 0.1 Vol.-% O2
    • 2 ppm CO
    • 1 ppm H2S
    Response Time (T90)
    • 10 sec O2
    • 15 sec CO & H2S
    • 20 sec IREx
    Dimensions 47 x 130 x 44 mm; 1.85 x 5.12 x 1.73 in.
    Weight 250 g; 8.8 oz.
    Ambient Conditions
    • Temperature: -20 - +50 °C
    • Pressure: 700 - 1300 mbar, 20.7 to 38.4” Hg
    • Humidity: 10 - 95% r.h.
    Operating Time ~ 10 h or rather ~12 h
    Charging Time  < 4 hrs
    IP Rating IP 67 – water and dust resistant
    Alarms
    • Visual (360°)
    • Audible (multi-tone >90 dB at 30cm)
    • Vibrating
    Pump Operation Maximum hose length 30m; 98 ft
    Calibration Sensor calibration – every 12 months
    Certifications 
    • ATEX – I M1 Ex ia I MA, II 1G Ex ia IIC T4/T3 (Ga)
    • EN 50104 (2002) + A1 (2004) O2, EN 45544 CO, CO2 & H2S, EN 60079-29-1:2007 Methane, Propane, Nonane, EN 50271:2001 Software and documentation
    • IEC – Ex ia I Ma, Ex ia IIC T4/T3 Ga for MQG 01**, MED – Marine Equipment Directive (Directive 96/98/EC)
    • CSA C US – Div.1, Class I, Groups A, B, C, D T4/T3, A/Ex ia IIC T4/T3/Ga
    What's Included
    • Drager X-am 5600 Monitor with specified sensors
    • Crocodile clip
    • NiMH rechargeable power pack and charger
    • Operation and Maintenance manual
    Take advantage of our web-exclusive free UK mainland* delivery offer on orders over £100 ex VAT.  See all costs for delivery below and visit our main delivery page for more information on timescales as some restrictions may apply.

    Please note: the last shipment date for orders will be Wednesday, the 20th of December, pending stock availability. Please get in touch with us to check availability. Any orders placed after this date will be processed on the 3rd of January, 2024.

    UK & Ireland Delivery Options

    UK Mainland Standard Delivery on orders under £100 ex VAT - £7.95 ex VAT*
    UK Mainland Express Delivery - £21.50 ex VAT (timescales vary – please see delivery page)
    Highlands Delivery - £25.00 ex VAT
    Channel Island Delivery - £40 ex VAT
    Northern Ireland & Republic of Ireland - £25 ex VAT
    Saturday Delivery Options – Please contact us on 0141 771 7749 for more info

    Standard delivery timescales are normally 3-5 working days, depending on stock availability.  Express delivery is normally 1-3 working days, depending on stock availability.  Although we carry an extensive stock, there may be some items that are unavailable due to quantities or otherwise.  In this case we will inform you of the status of your order and whether or not it can be fulfilled within our standard delivery timeframe. *Mainland UK delivery excludes Northern Ireland, other charges apply.

    Please visit our main delivery page for more terms and conditions or contact our Sales Team on 0141 771 7749  or [email protected] for more information. Currently, some manufacturers are facing production and delivery issues due to Brexit and custom clearance and this is affecting lead times of even some of our standard stocked items.  We're trying our best to prevent these issues from affecting orders but please be aware that there may be some delays.  We are aiming to communicate this as best and as early as possible. 

    International Delivery Options

    Delivery costs vary between countries.  Please visit our main delivery page for more information.

    ORDER CANCELLATION AND GOODS RETURN

    Should you wish to cancel an order or return unwanted goods please follow the procedures detailed below to help us ensure cancellations/returns are processed as quickly and efficiently as possible.

    Simply log on to your customer account, note the order reference number and email the full cancellation details to [email protected] or contact us on 0141 771 7749. Assuming the order has not been despatched we will cancel.

    You have the right to cancel the purchase of goods without having to give a reason at any time within the “cooling off period” of fourteen working days, beginning the day after you take delivery of your order.

    You must notify us of your cancellation in writing via email to [email protected] or to our contact address. (Details Here)

    If you are in possession of the goods you are under the duty to retain them and take reasonable care of them.

    You must send the goods back to us in their original condition to our contact address at your own cost (unless we delivered the item to you in error or the item is damaged or defective) as soon as possible once you have cancelled the contract.

    Alternatively we will collect the goods from you which will incur a charge no greater than the actual cost of arranging the collection and shipping. In this case you must make the goods available for collection. We will contact you to make further arrangements.

    We reserve the right to make a charge not exceeding our direct costs of recovering the goods if you do not return the goods or return them at our expense.

    Upon receipt of returned items in satisfactory condition we will arrange a full credit by the same method used to pay for the goods originally. Any credit due will be processed within a maximum of thirty days.

    Note: If you wish to return goods for refund or exchange after 14 days, a re-stocking fee of 20% of the full order total will apply.

    If upon receipt of goods you find them to be faulty, damaged or if you have been incorrectly supplied an item, you should notify us within 24 hours by contacting 0141 771 7749 or [email protected] and quoting your order number and contact details.

    Frontline Safety will arrange uplift of any damaged or wrongly received goods and if on inspection of goods we also find them to be damaged, faulty or incorrectly supplied, we will offer replacement goods or provide a full refund.

    We recommend you inspect all goods prior to signing for and accepting delivery. If there is any visible damage to the outer packaging, ensure goods are sign for as damaged. In instances where it isn’t possible to sign for goods as damaged, these should be signed for as unexamined.


    Note: If your goods happen to develop a fault out with the standard returns period but within supplied warranty period or if you require any additional assistance, please contact us on 0141 771 7749 or email [email protected]

    IMPORTANT INFORMATION

    All postage, handling, customs and duty charges for all returned goods are the responsibility of the customer. We recommend using a fully traceable, insured service as goods are your responsibility while in transit.

    Drager X-am 5600 Gas Detection Kit IREX, O2, Dual CO/H2S

    The Drager X-am 5600 is a small and reliable multi gas detector.  It’s ideal for personal monitoring applications and use in tough environments

    It has the ability to measure up to 6 gases.  This monitor in particular is able to detect explosive, combustible hydrocarbons in the range of the lower explosive limit, carbon monoxide hydrogen sulphide and also oxygen.

    Additional equipment, suitable for use with the X-am 5600 includes the X-zone 5000 (for area monitoring applications), Drager CC-Vision PC software and the Drager Bump Test Station and X-dock testing and calibration station.

     

    Key Features
    • Water-tight, robust detector with integrated rubber boot
    • Simple two-button control panel
    • Retro-reflective labels – easy to find monitor
    • Large display shows clear readings
    • Datalogging capability – read out via infrared > 1000 h with 6 gases/recording interval of 1 value per minute
    • Gas inlets are featured on the upper side and front side of the instrument
    Specifications
    Range (ppm)
    • 0 -100% LEL
    • 0 – 100 Vol.-% Methane, Propane, Ethylene
    • 0 – 25 Vol.-% O2
    • 0 – 2000 ppm CO
    • 0 – 200 ppm H2S
    Resolution (ppm)
    • 1% LEL
    • 0.1 Vol.-% CH4
    • 0.1 Vol.-% O2
    • 2 ppm CO
    • 1 ppm H2S
    Response Time (T90)
    • 10 sec O2
    • 15 sec CO & H2S
    • 20 sec IREx
    Dimensions 47 x 130 x 44 mm; 1.85 x 5.12 x 1.73 in.
    Weight 250 g; 8.8 oz.
    Ambient Conditions
    • Temperature: -20 - +50 °C
    • Pressure: 700 - 1300 mbar, 20.7 to 38.4” Hg
    • Humidity: 10 - 95% r.h.
    Operating Time ~ 10 h or rather ~12 h
    Charging Time  < 4 hrs
    IP Rating IP 67 – water and dust resistant
    Alarms
    • Visual (360°)
    • Audible (multi-tone >90 dB at 30cm)
    • Vibrating
    Pump Operation Maximum hose length 30m; 98 ft
    Calibration Sensor calibration – every 12 months
    Certifications 
    • ATEX – I M1 Ex ia I MA, II 1G Ex ia IIC T4/T3 (Ga)
    • EN 50104 (2002) + A1 (2004) O2, EN 45544 CO, CO2 & H2S, EN 60079-29-1:2007 Methane, Propane, Nonane, EN 50271:2001 Software and documentation
    • IEC – Ex ia I Ma, Ex ia IIC T4/T3 Ga for MQG 01**, MED – Marine Equipment Directive (Directive 96/98/EC)
    • CSA C US – Div.1, Class I, Groups A, B, C, D T4/T3, A/Ex ia IIC T4/T3/Ga
    What's Included
    • Drager X-am 5600 Monitor with specified sensors
    • Crocodile clip
    • NiMH rechargeable power pack and charger
    • Operation and Maintenance manual
    Take advantage of our web-exclusive free UK mainland* delivery offer on orders over £100 ex VAT.  See all costs for delivery below and visit our main delivery page for more information on timescales as some restrictions may apply.

    Please note: the last shipment date for orders will be Wednesday, the 20th of December, pending stock availability. Please get in touch with us to check availability. Any orders placed after this date will be processed on the 3rd of January, 2024.

    UK & Ireland Delivery Options

    UK Mainland Standard Delivery on orders under £100 ex VAT - £7.95 ex VAT*
    UK Mainland Express Delivery - £21.50 ex VAT (timescales vary – please see delivery page)
    Highlands Delivery - £25.00 ex VAT
    Channel Island Delivery - £40 ex VAT
    Northern Ireland & Republic of Ireland - £25 ex VAT
    Saturday Delivery Options – Please contact us on 0141 771 7749 for more info

    Standard delivery timescales are normally 3-5 working days, depending on stock availability.  Express delivery is normally 1-3 working days, depending on stock availability.  Although we carry an extensive stock, there may be some items that are unavailable due to quantities or otherwise.  In this case we will inform you of the status of your order and whether or not it can be fulfilled within our standard delivery timeframe. *Mainland UK delivery excludes Northern Ireland, other charges apply.

    Please visit our main delivery page for more terms and conditions or contact our Sales Team on 0141 771 7749  or [email protected] for more information. Currently, some manufacturers are facing production and delivery issues due to Brexit and custom clearance and this is affecting lead times of even some of our standard stocked items.  We're trying our best to prevent these issues from affecting orders but please be aware that there may be some delays.  We are aiming to communicate this as best and as early as possible. 

    International Delivery Options

    Delivery costs vary between countries.  Please visit our main delivery page for more information.

    ORDER CANCELLATION AND GOODS RETURN

    Should you wish to cancel an order or return unwanted goods please follow the procedures detailed below to help us ensure cancellations/returns are processed as quickly and efficiently as possible.

    Simply log on to your customer account, note the order reference number and email the full cancellation details to [email protected] or contact us on 0141 771 7749. Assuming the order has not been despatched we will cancel.

    You have the right to cancel the purchase of goods without having to give a reason at any time within the “cooling off period” of fourteen working days, beginning the day after you take delivery of your order.

    You must notify us of your cancellation in writing via email to [email protected] or to our contact address. (Details Here)

    If you are in possession of the goods you are under the duty to retain them and take reasonable care of them.

    You must send the goods back to us in their original condition to our contact address at your own cost (unless we delivered the item to you in error or the item is damaged or defective) as soon as possible once you have cancelled the contract.

    Alternatively we will collect the goods from you which will incur a charge no greater than the actual cost of arranging the collection and shipping. In this case you must make the goods available for collection. We will contact you to make further arrangements.

    We reserve the right to make a charge not exceeding our direct costs of recovering the goods if you do not return the goods or return them at our expense.

    Upon receipt of returned items in satisfactory condition we will arrange a full credit by the same method used to pay for the goods originally. Any credit due will be processed within a maximum of thirty days.

    Note: If you wish to return goods for refund or exchange after 14 days, a re-stocking fee of 20% of the full order total will apply.

    If upon receipt of goods you find them to be faulty, damaged or if you have been incorrectly supplied an item, you should notify us within 24 hours by contacting 0141 771 7749 or [email protected] and quoting your order number and contact details.

    Frontline Safety will arrange uplift of any damaged or wrongly received goods and if on inspection of goods we also find them to be damaged, faulty or incorrectly supplied, we will offer replacement goods or provide a full refund.

    We recommend you inspect all goods prior to signing for and accepting delivery. If there is any visible damage to the outer packaging, ensure goods are sign for as damaged. In instances where it isn’t possible to sign for goods as damaged, these should be signed for as unexamined.


    Note: If your goods happen to develop a fault out with the standard returns period but within supplied warranty period or if you require any additional assistance, please contact us on 0141 771 7749 or email [email protected]

    IMPORTANT INFORMATION

    All postage, handling, customs and duty charges for all returned goods are the responsibility of the customer. We recommend using a fully traceable, insured service as goods are your responsibility while in transit.