Honeywell BW RigRat Area Gas Monitor
The BW RigRat is a modular area monitor, designed detect gas and house up to 6 toxic sensors. This is available as a diffusion model or a pumped model.
Suitable for various applications including area monitoring, confined space entry, inert gas applications, fence line monitoring, welding tents, compressed air monitoring, leak monitoring and shutdown controls. Choose from bluetooth only models, mesh models capable of connecting to specific portables gas detectors and MeshGuard systems and also WiFi compatible models.
Available sensors include Low Power NDIR LEL sensors, Catalytics LEL sensors, PID, CO, H2S, SO2, NO, NO2, HCN, NH3, Cl2, O2 and CO-HR/H2. Please see the specifications table for more information on available ranges
It’s very easy to use and can be operated using only one button. It has a high-resolution display. When gas is detected the BW RigRat will activate two alarms. One is an audible alarm at 108db (at 1 meter) and the other is a 360° LED light.
The Mesh (868 MHz, 900 MHz or 2.4GHz) version of the BW RigRat can operate with other RigRats in a closed-loop application. One Honeywell BW RigRat can connect up to 8 other RigRats and display the wireless signal in the wireless assistant display. If one alarm goes off then all monitors will go in to alarm, however the unit that has detected the danger will show a red light and the others will show an amber light. There’s no need to reform a network if one of the devices is removed, the units will reconfigure themselves. In a single network you can have up to 16 units, so long as there is a different multiple Honeywell BW RigRat binding the systems together.
All Honeywell BW RigRats are equipped with a Bluetooth function (BLE) which can connect with the mobile app to allow setup and configuration. Everything can be set up easily and doesn’t require a great deal of training. Calibration and datalogging can be managed through this.
Additional accessories, that can be purchased separately, include carrying straps (allow 3-point contact to carry the RigRat whilst climbing ladders), yellow cage available to buy to help protect the unit and a storage rack to stack multiple units.
- Run-time can be estimated depending on sensors and model type – contact FLS to find out more
- Rugged device and can withstand harsh conditions and temperatures
- IP 65/67 tested
- Built-in calibration certificate can be accessed
- Two different LEL sensors available (NDIR and NDIR-Low Power)
- Able to connect with other Honeywell, BW and RAE devices such as TouchPoint, Meshguard and MultiRAE monitors
- Approval for explosive atmospheres (ATEX)
- Suitable for lone workers as its transportable
Monitor-Only Configuration Includes: |
|
Model Number |
BWRR100P/BWRR100D |
Sensor Specification (For other available sensors please refer to the Datasheet in the downloads section) |
|
Temperature Ranges |
|
Size |
15.8 x 11.4 x 18.5 in. / 40.0 x 29.0 x 47.0 cm |
Weight |
17.6 lb / 8 kg |
Battery & Charge Time |
|
Run Time |
|
Display |
3.5” 240 x 320 TFT color LCD with white LED backlight |
Datalogging |
Complete gas sensors and instrument information for at least 4 months at one minute intervals |
Wireless |
|
Radio Module and Range |
|
Outdoor Location |
|
Temperature/Humidity |
|
Safety Certifications (Pending) |
|
Wireless Approvals (Pending) |
|
Wireless Approvals (Pending) |
|
RoHS (pending) |
RoHS Complaint, Directive (EU) 2015/863 |
Noise Sensor |
|
External Ports |
|
Safe Area Charge Port (AC CHG Safe Area) |
Battery charger input 6 VDC 3 A typical; connect to AC/DC adaptor |
Field Charge (IS CHG Hazardous) |
Intrinsically safe line power supply input to extend instrument runtime (low-power model only) |
RAEmet Port (Serial) |
Port to RAEMet wind sensor (optional) |
Analog/Switch Input Port (4-20 mA In) |
4-20 mA signal input, X1 channel/switch on/off signal input, X1 channel (optional) |
On/Off Switch Output (Switch) |
Max 20 V / 120 mA, SPDT Normal Open, X3 channels for external ports (optional). Refer to User Guide for complete details. |