Honeywell BW Solo Gas Detector - Wireless Version

Honeywell BW solo wireless version with Bluetooth capabilities single gas monitor

PRODUCT CODE:: BW-SOLO-WIRELESS

Serviceable single gas detector designed to detect levels of O2, CO, H2S, NH3, CO2, SO2, HCN, CL2, NO, NO2, PH3, ETO, CLO2, O3 or H2. This particular version of the Solo is wireless and has Bluetooth capability that can be turned off.

Read our Key Features of The BW Solo Wireless blog to find out more about the Wireless Version.

Subscribe to back in stock notification

I have read & accept the Privacy Policy

£263.00

inc VAT

Additional services

Traceable Certificate of Calibration for Single Gas Monitor

Qty

£35.00

Gas detection equipment requires service and calibration every 6 months. In acknowledgement of this we are offering you your first calibration at a special rate.

Product description

Honeywell BW Solo Gas Detector - Wireless Version

The Honeywell BW Solo Gas Detector is designed to detect specific types of gas. This particular model is the wireless version and comes in the following configurations:

O2, CO, H2S, NH3, CO2, SO2, HCN, CL2, NO, NO2, PH3, ETO, CLO2, O3 and H2

It's a reusable gas detector and can be serviced (6 monthly acording to manufacturer recommendations). The Wireless version has many additional uses and features in comparison to the BW Solo Standard and Lite versions. The wireless BW Solo has BLE bluetooth capability. This means that it can be connected with Honeywell's mobile apps, data can be shared without using a doc, wireless data and statuses can be trasmitted and real-time remote alarm notifications are possible.

The Wireless Solo can connect (from up to 6m away) to the Device Configurator app on a phone or tablet with internet connection, which will allow you to go through a set-up of the unit and choose your alarm set points. It will also allow you to view calibration readings, certs, email these and upgrade firmware.
The Safety Communicator app will send readings instantly to Honeywell's real-time monitoring software, so long as there is internet connection. This app also provides information on remote visibility on worker safety and location.

The BW Solo gas detectors have a triple alarm system and will audibly and visually alarm when gas is detected, as well as vibrate.

Key Features

Easy to use with one-button operation
Sensor, filter and battery can be easily replaced if required
Battery typically lasts for 12 months but can be replaced (6 months for 1-series O2 sensor/4 months for 1S CO2)
Workers and locations can be assigned using the Assign function, keeps track of inventory
Multiple languages available
Data logging function with a rolling 24-hour peak reading
Ingress Protection - IP68
Carries out self-test on activation to check sensor sensor integrity, circuitry, battery (continuous) and audible/visual alarms

Specification

Size	2.7 x 2.6 x 1.4 in. / 7.0 x 6.7x 3.6 cm (1-Series sensor models) ` 2.7 x 2.6 x 1.6 in. / 7.0 x 6.7x 4.1 cm (4-Series sensor models)
Weight	3.6 to 4.1 oz. / 103 to 116 g, depending on installed sensor
Humidity	0% - 95% RH (non-condensing)
Typical Battery Life	12 months (6 months for 1-Series O2
Connected Worker (Wireless Solos Only)	Bluetooth™ Low Energy (BLE) – Ability to connect to Honeywell’s Safety Communicator App
Languages	English, French, Spanish, German, Italian, Russian, Japanese, Chinese, Korean, Portuguese, Dutch
Approvals	n: Class I, Division 1, Groups A, B, C, D T4 Class I, Zone 0, AEx/Ex ia IIC T4 Ga -40°C≤ Tamb ≤ 60°C ATEX: Sira 18ATEX2243 X 2460 g II 1G Ex ia IIC T4 Ga g I M1 Ex ia I Ma -40°C≤ Tamb ≤ 60°C IECEx: IECEx SIR 18.0058 Ex ia IIC T4 Ga / Ex ia I Ma -40°C≤ Tamb ≤ 60°C FCC ID: SU3BWS1 IC: 20969-BWS1 RED: RE-D Directive 2014/53/EU Approval Pending for CO2 model
Warranty	3 years for 1-Series detectors and sensors (H2S, CO, O2, CO2) 2 years for 4-Series detectors and sensors (1 year for NH3, Cl2, O3, ETO, ClO2 sensors)