MSA 92 AB/St Combined Filter
MSA’s 92 AB/St Combined filter is part of the range of 9X series of MSA gas and combination filters. These are in full compliance with REACH regulations and do not include any toxic materials listed in the European regulation.
This particular filter offers protection in applications including organic gases and vapours (with boiling point >65°C), inorganic gases and vapours (both class 2 - 5000 ml/m3 - 0.5 Vol-%), as well as particles (class 2 - max. filter penetration 6%, standard EN 14387).
There are some limitations of use with the 9X series of filters which includes being used everywhere except for some inherent limitation e.g. containers or confined spaces.
Conditions must be known such as type, property and composition of contaminant, sufficient oxygen content of inhalation air (>17 vol.-%) and also observation of local or national restrictions or conditions.
Filter recommendations are based on pure substances and with mixtures, by-products, or decomposition products, the impurities must be taken into account.
This particular filter is 270g in weight, 107mm in diameter and 85mm in height. It uses thread connector EN148-1. They have also successfully passed a dolomite test and are also reusable according to EN 143:2000/A1:2006.
- Protection against toxic gas and vapors
- Gas filter class 2
- Protection class P2 against particles
Colour Code | Filter Type | Contaminants present |
AX |
Gases and vapours of organic compounds with boiling point < 65 °C | |
A |
Gases and vapours of organic compounds with boiling point > 65 °C | |
B |
Inorganic gases and vapours (not CO), e.g. chlorine, H2S, HCN | |
E |
Sulphur dioxide, hydrogen chloride | |
K |
Ammonia and organic Ammonia derivates | |
CO |
Carbon monoxide |
|
Hg |
Mercury vapour |
|
NO |
Nitrous Gases including nitrogen monoxide |
|
P |
Particles | |
Reactor |
Radioactive iodine including radioactive methyl iodide |