MSA ALTAIR Hydrogen Sulphide (H2S) 10/15 ppm Gas Detector (Adjustable)
The Altair is a maintenance-free single gas detector from MSA and is Ideal for industrial applications where detection of toxic gas is necessary. It features a high-performing, reliable Hydrogen Sulphide sensor with an alarm range of 10-15ppm.
The MSA Altair can be used in tough environments with a rugged suspension clip which will allow you to wear your detector almost anywhere.
This single gas detector is economical and doesn’t require any additional accessories to carry out a simple bump check. This can be done simply by a single button press. Results from this are displayed on screen for 24 hours, allowing you to use the information as a checkmark.
Other testing equipment available for the Altair is the QuickCheck, the Galaxy which is a standalone calibration test system and the JetEye USB IR dongle for downloading data.
- Operational lifetime of a minimum two years
- Large, numeric display with easy-to-read results of the unit lifetime, alarm conditions, set points, peak reading and hours in alarm time since activation
- Thick rubberised housing is tightly sealed and offers protection from accidental drops - tested to survive a 3m drop test.
- Integrated metal screw inserts in the monitor offer high structural ability
- Latest 25 events are automatically recorded
Range (ppm) | 0 to 100 ppm |
Size | 81 x 51 x 23 mm |
Weight | 85g |
Operating Range | -20 – +50 °C |
Humidity | 10-95% RH non-condensing |
Instrument Life | >2 years at an average of 2 minutes of alarm per day |
IP Rating | IP 67 – protection against water and dust ingress |
Alarms |
|
Approvals | Europe – ATEX II 2G EEx ia IIC T4 (-20°C to +50°C) |
Warranty | 2 years or 1080 minute alarm under normal conditions |
What's Included? |
|