MSA ALTAIR PRO Chlorine Dioxide (ClO2) 0.1/0.3 ppm Gas Detector
The MSA Altair Pro can be used for detecting harmful levels of Chlorine Dioxide and is ideal for use in industrial applications such as oil and gas, chemicals, steel and iron, utilities, the fire service and contracting work.
This single gas detector is a high-performing instrument and uses field proven 20 series sensors which are easy to fit. This reduces the downtime of your monitor.
You can be assured that your Altair Pro ClO2 will be reliable and robust. It features a rugged suspension clip which attaches the monitor securely to clothing.
Bump checking your monitor is important and this test can be done with a single button press. The results will be shown on screen for 24 hours and can be used as a checkmark. Other products available for testing the Altair Pro include the MSA QuickCheck and the Galaxy calibration system – available from Frontline Safety.
- Thick and rubberised housing offers protection against accidental drops - tested to withstand a 3m drop test
- Numeric, large display is easy to read and shows gas concentrations, alarm conditions, battery status, set points and peak readings
- One-button operation makes use of the detector straightforward
- Other suspension clips are available; (cell phone clip, lanyard clip and hardhat clip
- Datalogging capability records latest 50 events every 3 minutes including peak gas readings
- Compact, highly-efficient CR2 battery is easy to replace
Range (ppm) | 0.2 ppm |
Resolution | 1.00 ppm |
Size | 81 x 51 x 23 mm |
Weight | 112 g including clip |
Operating Range | -20 – +50 °C |
Humidity | 10-95% RH non-condensing |
Battery Life | Minimum 12 months under 8 hours per day operation over a working week |
IP Rating | IP 67 |
Alarms |
|
Approvals | ATEX – II 2G EEx ia IIC T4 (-20 °C + 50°C) |
What's Included? |
|