ToxiRAE 3 Carbon Monoxide (CO) 0-500 ppm Gas Detector
Please note: this product has now been replaced by the BW Clip range.
The ToxiRAE 3 is a full-featured Carbon Monoxide detector from RAE Systems. This particular model has a range of 0-500 ppm. It’s ideal for use in the emergency response sector, environmental industry, fire services, oil and gas and industrial safety.
With one of the lowest costs of ownership on the market the detector offers unequalled value.
Harmful concentrations of CO will be detected using the high-performance, 3 electrode, pinless micro sensor. This is a fast responding sensor which provides increased protection and worker safety.
Calibration and bump test reminders can be configured. The ToxiRAE 3 CO monitor is compatible with the AutoRAE Lite bump test and calibration station which can be purchased from Frontline Safety.
The AutoRAE Lite provides fast results which allow the detectors to be put back to work quickly.
- Rugged housing - dust-tight and waterproof
- Large display is easy to read and shows gas concentrations or days remaining (user-configurable)
- Intuitive interface is simple to operate
- Gas types identifiable by colour-coded labels
- Up to 10 events can be recorded on datalogger
- Instrument response time of T90 < 12 secs
|Range (ppm)||0 to 500|
3.4" x 2.2" x 0.8" (8.6 x 5.5 x 2.0mm)
|Weight||3.5 oz (99.4 g)|
Continuous: -4 to +140 °F (-20° to +60°C)
Intermittent: -22 to +140 °F (-30° to +60°C)
|Humidity||0-95% RH non-condensing|
|Battery Life||User-replaceable 2/3 AA high-capacity lithium|
|IP Rating||IP 67 – water and dust-resistant|
US and Canada: C1D1, Groups A, B, C, D, T4
Europe: ATEX II 1G EEx ia IIC T4
IECEX: Ex ia IIC T4
|2 years inc. sensor and battery if used within specs|
|Two-point calibration for zero and span|