TSI PortaCount (8040) with UK Version Mini-Tablet
The TSI PortaCount Pro Respirator 8040 is an innovative fit tester that comes with mini tablet as its user interface.The 8040 model provides fit-testing for full face masks, half face masks and FFP3 disposable masks.
One of the main features of the Portacount 8040 is its real-time readings and measurements. Using the real-time mode will allow you to quickly identify the correct mask size for your employee or subject.
Ensure you are compliant with fit-testing standards and offer your staff the very best protection possible from their face masks. The Portacount 8040 is an effective way of carrying out quantitative fit testing and preventing the use of poorly-fitting masks.
The use of FitPro Ultra Fit Test Software will allow you to automatically record test results to a database, which can also be exported, shared and managed.
- No embedded display as the tablet is used
- Clear start and completion process
- Real-time FitCheck Mode
- Allows early indication of poorly-fitting respirators
- Fewer steps involved to fit-test
- Video animations allow staff to be guided through the correct movements for each fit test exercise
What’s Included? |
|
Fit Factor Range |
1 to greater than 10,000 |
Typical Fit Factor Accuracy |
±10% of reading |
Respirator Facepieces that can be Fit Tested |
|
Fit Factor Measurement |
Direct measurement of fit factor (Cout/Cin)* |
Dimensions |
4.83 in. x 10.5 in. x 9.46 in. (12 cm x 27 cm x 24 cm) |
Weight |
Unit Only 6.1 lb. (2.7 kg) |
Power |
Autosensing 100 to 250 VAC, 50 to 60 Hz |
Flow Rate |
Sample 350 cm3/min |
Temperature Range |
Operation 32 to 100° F (0 to 38° C) |
Working fluid |
99.5% reagent grade isoproponal |
Carrying Case |
Dimensions (HWD) 10.0 in. x 20.5 in. x 15.5 in. (25.4 cm x 52.1 cm x 39.4 cm) |
Pass/Fail Setting |
User-selectable: 0 to 10,000 |
Factory Recalibration Interval |
One year |
Warranty |
Two years on workmanship and materials |
Communications |
WiFi, USB-C, USB-A |
Minimum PC Hardware Requirements for FitPro Ultra Fit Test Software |
Windows® 7 (32 and 64 bit), Windows 8 (32 and 64 bit), or Windows 10 (32 and 64 bit) operating system Microsoft.Net version 4 (installation software will install Microsoft.Net if necessary) Note — An internet connection is required to install Microsoft.Net ≥ 1 GHz process ≥ 1280 x 800 screen resolution monitor 500 MB free space on hard drive 1 free USB port |
Minimum Tablet requirements |
Windows 10 operating system USB port (for initial set up) |
Software |
FitPro Ultra Software featuring advanced user interface, animated graphics, and interactive troubleshooting guide |