TSI PortaCount Model 8048-1 (230V Generator)
The 8048-1 Pro Portacount Respirator is a fit-tester which uses a tablet or computer as a user interface. The 8048 and 8041 models do not have embedded displays. TSI’s Portacount 8048-1 fit-tester has the ability to fit-test full face masks, half face masks and disposable masks (FFP3, FFP1 and FFP2).
Use the Portacount 8048-1 to carry out quantitative fit testing and stay compliant with fit-testing standards. It’s an effective way of ensuring your staff are fully protected and will prevent them from using poorly-fitting masks.
TSI’s Portacount is a real-time monitor and will provide real-time readings and measurements to quickly identify the correct size of mask for your employee or subject. An additional advantage to this fit-tester is the compatible software. This will allow you to automatically record your test results within a database. These results can then be exported, shares and managed.
Find the TSI Fit Test Probes here
- Defined start and end through a simple process
- FitCheck Mode – real-time results
- Offers an early indication of poorly-fitting respirators
- Be guided through the correct movements for fit-testing exercises through helpful video animations
What’s Included? |
|
Fit Factor Range |
1 to greater than 10,000, 1 to 200 for N95 masks |
Typical Fit Factor Accuracy |
±10% of reading |
Respirator Facepieces that can be Fit Tested |
|
Fit Factor Measurement |
Direct measurement of fit factor (Cout/Cin)* |
Dimensions |
4.83 in. x 10.5 in. x 9.46 in. (12 cm x 27 cm x 24 cm) |
Weight |
Unit Only 7.0 lb. (3.2 kg) |
Power |
Autosensing 100 to 250 VAC, 50 to 60 Hz |
Flow Rate |
Sample 350 cm3/min |
Temperature Range |
Operation 32 to 100° F (0 to 38° C) |
Working fluid |
99.5% reagent grade isoproponal |
Carrying Case |
Dimensions (HWD) 10.0 in. x 20.5 in. x 15.5 in. |
Pass/Fail Setting |
User-selectable: 0 to 10,000 |
Factory Recalibration Interval |
One year |
Warranty |
Two years on workmanship and materials |
Communications |
WiFi, USB-C, USB-A |
Minimum PC Hardware Requirements for FitPro Ultra Fit Test Software |
Windows® 7 (32 and 64 bit), Windows 8 (32 and 64 bit), or Windows 10 (32 and 64 bit) operating system Microsoft.Net version 4 (installation software will install Microsoft.Net if necessary) Note — An internet connection is required to install Microsoft.Net ≥ 1 GHz process ≥ 1280 x 800 screen resolution monitor 500 MB free space on hard drive 1 free USB port |
Minimum Tablet requirements |
Windows 10 operating system USB port (for initial set up) |
Software |
FitPro Ultra Software featuring advanced user interface, animated graphics, and interactive troubleshooting guide |