TSI PortaCount Pro Respirator Fit Tester (Universal LC Adap)
The TSI PortaCount Pro is a respirator fit tester which will quantitively fit test gas masks, SCBA and respirators. There are optional mask sampling adapters available for various other masks.
Using the PortaCount Pro will provide fast and accurate results which are HSE and OSHA compliant (except N95, P1 and P2). There’s no external computer required as the PortaCount can be used as a standalone unit. If you wish to automate the process then it can be used with FitPro+ Fit Test Software. The use of a computer would also allow the generation of reports and print fit test cards.
It’s touchscreen so can be used with your fingers, a pen or a stylus. The Portacount Pro computes respirator fit factor using microscopic particles in the ambient air.
For more information please refer to the datasheet.
A wide range of accessories are available for the TSI PortaCount Pro, visit here.
- Easy to use
- More accurate and less tedious than a qualitative method
- Colour-screen
- Measure fit factors greater than 10,000
Respirator Facepieces than can be fit tested |
|
Dimensions |
6.75 in. x 8.5 in. x 9.5 in. (17 cm x 22 cm x 24 cm) |
Weight |
Unit Only – 5 lb (2.7kg) |
Flow Rate |
|
Alcohol |
|
Pass/Fail Setting |
User selectable: 0 to 10,000 |
Factory Recalibration Interval
|
One year |
Warranty |
Two years on workmanship and materials |
Typical Fit Factor Accuracy |
±10% of reading |
Fit Factor Range |
1 to greater than 10,000 |
Power |
Autosensing 100 to 250 VAC, 50 to 60 Hz |