Drager Alcotest 5510
Please note: this product has been phased out. The replacement model is the Drager Alcotest 5820.
The Alcotest 5510 from Drager is an entry model of the successful Alcotest 6510 and offers professional users precise and quick breath alcohol analysis. The monitor comes in a user-friendly, compact form and has a wide range of possible configurations which allows it to adapt to meet different international regulations and guidelines.
Safe and Easy to Use
With automatic sampling and calibration processes making the instrument easy to use, all measurement functions are controlled via a single key, while menu navigation is controlled by two menu keys. The mouthpieces for the Alcotest 5510 are designed to be fitted quickly and securely, even when light conditions are poor.
Rapid ready for use
This Alcotest instrument from Drager can be ready for use in no time at all due to the very latest in electronics technology.
Quick and precise analysis
The 1/4“-DrägerSensor with its optimized gas dynamics measures specifically alcohol. Even at high alcohol concentrations direct gas paths, fast pneumatic components and short reaction times of the sensor ensure the measurement result will be displayed quickly.
Low Energy Consumption
The Drager Alcotest 5510 can conduct more than 1500 breath alcohol tests on just two mignon batteries (AA size)
‘Slide’n’click’ mouthpiece
The mouthpiece shape means the user will intuitively fit it correctly and the air outlet cannot be obstructed, preventing any manipulation when the breath sample is given. The 5510’s mouthpiece also features a spacer which prevents the test subject’s lips from coming into contact with the instrument’s housing. This feature can also be used as a mouthpiece ejector. Mouth pieces are individually packaged and can be attached to the instrument easily and hygienically.
Practical Design
The compact and practical design of the Drager Alcototest 5510 means it can fit into a shirt pocket and can be equally used by both right-handed and left-handed people. The separation of the mouthpiece and the grip area automatically ensures a certain distance between the hand of the operator and the mouth of the person to be tested.
Integrated datalogging
The datalogger holds the 10 latest measurement results with their respective numbers, with individual results able to be called up from the log through the menu keys.
- Offers professional users precise and quick breath alcohol analysis
Comes in a user-friendly and compact form
Can be easily adapted to meet different international regulations and guidelines
Uses a ‘slide’n’click’ mouthpiece function
Principle of measurement | Electrochemical DragerSensor in 1/4” technology; alcohol-specific |
Measurement Range | 0 to 2.5 mg/L; if measurement range limit is exceeded, a message is displayed |
Sampling |
|
Ready for use | approx. 3 s after switching on |
Display of measurement result | After approx. 3 s (at 0 mg/L); after approx. 10 s (at 0.5 mg/L, room temperature) |
Operating temperature | -5 to +50 °C / 23 to 122 °F |
Humidity | 10 to 100 %RH, non-condensing |
Ambient pressure | 600 to 1,400 hPa / 17.7 to 41.3 inch Hg |
Display | Graphic backlit LCD display; 41 mm x 24 mm / 1.6” x 0.9” (128 x 64 pixels) |
LED | 3-colour, to support display and warning messages |
Audible signal | Different signal tones to support display messages and warnings |
Datalogger | Storage of last 10 tests with test numbers |
Power supply | Two AA batteries. Charge status displayed. Approx. 1,500 tests can be performed on one set of alkaline batteries. |
Mouthpiece adaption | Slide’n’click mouthpiece attachment. Can be fitted for right or left orientation |
Mouthpiece | Hygienically, individually packaged, with tamper-proof, non-obstructable air outlet, mouthpiece ejector and spacer between mouth and instrument housing |
Operating concept | Measurement functions can be performed using just one key; menu navigation is via two menu keys |
Calibration | Wet gas or dry gas calibration |
Housing | Impact resistant ABS/PC |
Size, weight | Approx. 140 mm x 70 mm x 30 mm / 5.5” x 2.8” x 1.2”, approx. 195 g / 0.5 lbs, incl. batteries |
Instrument configuration | Direct menu-guided configuration of instrument settings (PIN required) No additional PC software needed |
Vibration and shock | Conforms to EN 60068-2-6, EN 60068-2-29 |
CE marking | Directive 89/336/EC (electromagnetic compatibility) |
Norm | EN 15964 |