large image
Over 6000 products
Loading...
PRODUCT CODE
MBA3-A1C112E-020
£3,727.20 £3,106.00
MultiRAE Pumped / 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Non-Wireless (PGM-6228)
 

MultiRAE Pumped / 10.6 eV PID/LEL/H2S/CO/O2 Gas Detector (PGM-6228)

MultiRAE (PGM-6228) Pumped / 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Non-Wireless

The MultiRAE is ideal for applications including industrial hygiene, personal protection and leak detection in industries such as aviation, chemicals, environmental, oil and gas, pharmaceutical, shipping and marine and also hazmat applications

It’s an advanced multi gas detector with the ability to monitor up to six gases.  This is a pumped model and features the following sensors: advanced PID sensor, combustible gas sensor, carbon monoxide, hydrogen sulphide, sulphur dioxide and oxygen depletion sensors.  The sensors that are used are intelligent, able to store calibration data and can be easily swapped in field.

Key Features
  • On-board gas library of 190 VOCs and 55 combustible gases extensive
  • LCD display with backlighting shows real-time reading of gas concentrations
  • Datalogging capability (6 months for 5 sensors, 24 x 7)
  • Simple 3 button operation
  • Built-in sampling pump. Auto shutoff in low-flow conditions
  • Data can be downloaded to PC with the use of the AutoRAE 2 Automatic Test and Calibration System
Specifications
Range
  • 0 to 5000 ppm VOC
  • 0 to 100% LEL
  • 0 to 500 ppm CO
  • 0 to 30% Vol. O2
  • 0 to 200 ppm H2S
Resolution
  • 0.1 ppm VOC
  • 1% LEL
  • 1 ppm CO
  • 0.1% Vol. O2
  • 0.1 ppm H2S
Dimensions (W x H x D) 7.6" H x 3.8" W x 2.6" D (193 x 96.5 x 66 mm)
Weight 31 oz. (880 g)
Battery Options
  • Rechargeable Li-ion battery (~12 hr runtime, <6hr recharge time)
  • Extended duration Li-ion (~18 hr runtime, <9hr recharge time)
  • Alkaline adapter with 4 x AA batteries (~6 hr runtime)
Calibration Automatic with AutoRAE 2 Test and calibration System or manual
Alarms
  • Audible (95 dB @ 30 cm)
  • Vibration
  • Visible (flashing bright red LEDs)
  • On-screen indication of alarm conditions
Operating Temperature -4° to 122°F (-20° to 50°C)
Humidity 0% to 95% relative humidity (non-condensing)
IP Rating IP-65 for dust and water ingress protection
Hazardous Location Approvals
  • CSA: Class I, Division 1, Groups A, B, C and D, T4
  • ATEX – 0575 II 2G Ex ia d IIC T4 Gb, 1G Ex ia IIC T4 Ga if IR Sensor is not installed I M2 Ex ia d I Mb
  • IECEx – Ex ia d IIC T4 Gb, Ex ia IIC T4 Ga if IR Sensor is not installed I M2 Ex ia d I Mb
  • IECEx/ANZEx: Ex ia d IIC T4 Gb, Ex ia IIC T4 Ga if IR Sensor is not installed Ex ia I Ma
CE Compliance (European Conformity)
  • EMC directive: 2004/108/EC
  • R&TTE directive: 1999/5/EC
  • ATEX directive: 94/9/EC
Warranty
  • Two years on non-consumable components
  • One year on sensor, fan, battery and other consumable parts
What's Included?
  • MultiRAE monitor with sensors as specified
  • Protective rubber boot, swivel belt clip and filter installed
  • Travel charger and adapters for PC communications, AC, calibration and alkaline battery
  • Desktop charging/PC communications cable
  • Toolkit with Hex tool and Philips screwdriver
  • Quick Start Guide and CD with documentation
  • ProRAE Studio II Instrument Configuration & Data Management Software
  • Calibration and test certificate
  • Warranty/registration card
  • 3 x spare external filters
  • PID sensor cap removal tool
  • PID zeroing filter (P/N: 008-3024-000)
  • IP-67/decontamination valve accessory
  • 6" flexi probe with inlet adapter
  • Comes in a hard transport case with custom foam that can also accommodate accessories and 2 calibration gas cylinders with 2 regulators (sold separately)
Take advantage of our web-exclusive free UK mainland* delivery offer on orders over £100 ex VAT.  See all costs for delivery below and visit our main delivery page for more information on timescales as some restrictions may apply.

UK & Ireland Delivery Options

UK Mainland Standard Delivery on orders under £100 ex VAT - £7.95 ex VAT*
UK Mainland Express Delivery - £21.50 ex VAT (timescales vary – please see delivery page)
Highlands Delivery - £25.00 ex VAT
Channel Island Delivery - £40 ex VAT
Northern Ireland & Republic of Ireland - £25 ex VAT
Saturday Delivery Options – Please contact us on 0141 771 7749 for more info

Standard delivery timescales are normally 3-5 working days, depending on stock availability.  Express delivery is normally 1-3 working days, depending on stock availability.  Although we carry an extensive stock, there may be some items that are unavailable due to quantities or otherwise.  In this case we will inform you of the status of your order and whether or not it can be fulfilled within our standard delivery timeframe. *Mainland UK delivery excludes Northern Ireland, other charges apply.

Please visit our main delivery page for more terms and conditions or contact our Sales Team on 0141 771 7749  or [email protected] for more information. Currently, some manufacturers are facing production and delivery issues due to Brexit and custom clearance and this is affecting lead times of even some of our standard stocked items.  We're trying our best to prevent these issues from affecting orders but please be aware that there may be some delays.  We are aiming to communicate this as best and as early as possible. 

International Delivery Options

Delivery costs vary between countries.  Please visit our main delivery page for more information.

You also have the option to 'Arrange Your Own Courier', whereby you organise the shipment of your own goods once they have reached our warehouse.

ORDER CANCELLATION AND GOODS RETURN

Should you wish to cancel an order or return unwanted goods please follow the procedures detailed below to help us ensure cancellations/returns are processed as quickly and efficiently as possible.

Simply log on to your customer account, note the order reference number and email the full cancellation details to [email protected] or contact us on 0141 771 7749. Assuming the order has not been despatched we will cancel.

You have the right to cancel the purchase of goods without having to give a reason at any time within the “cooling off period” of fourteen working days, beginning the day after you take delivery of your order.

You must notify us of your cancellation in writing via email to [email protected] or to our contact address. (Details Here)

If you are in possession of the goods you are under the duty to retain them and take reasonable care of them.

You must send the goods back to us in their original condition to our contact address at your own cost (unless we delivered the item to you in error or the item is damaged or defective) as soon as possible once you have cancelled the contract.

Alternatively we will collect the goods from you which will incur a charge no greater than the actual cost of arranging the collection and shipping. In this case you must make the goods available for collection. We will contact you to make further arrangements.

We reserve the right to make a charge not exceeding our direct costs of recovering the goods if you do not return the goods or return them at our expense.

Upon receipt of returned items in satisfactory condition we will arrange a full credit by the same method used to pay for the goods originally. Any credit due will be processed within a maximum of thirty days.

Note: If you wish to return goods for refund or exchange after 14 days, a re-stocking fee of 20% of the full order total will apply.

If upon receipt of goods you find them to be faulty, damaged or if you have been incorrectly supplied an item, you should notify us within 24 hours by contacting 0141 771 7749 or [email protected] and quoting your order number and contact details.

Frontline Safety will arrange uplift of any damaged or wrongly received goods and if on inspection of goods we also find them to be damaged, faulty or incorrectly supplied, we will offer replacement goods or provide a full refund.

We recommend you inspect all goods prior to signing for and accepting delivery. If there is any visible damage to the outer packaging, ensure goods are sign for as damaged. In instances where it isn’t possible to sign for goods as damaged, these should be signed for as unexamined.


Note: If your goods happen to develop a fault out with the standard returns period but within supplied warranty period or if you require any additional assistance, please contact us on 0141 771 7749 or email [email protected]

IMPORTANT INFORMATION

All postage, handling, customs and duty charges for all returned goods are the responsibility of the customer. We recommend using a fully traceable, insured service as goods are your responsibility while in transit.

MultiRAE (PGM-6228) Pumped / 10.6 eV PID / LEL / H2S / CO / O2 / Li-ion / Non-Wireless

The MultiRAE is ideal for applications including industrial hygiene, personal protection and leak detection in industries such as aviation, chemicals, environmental, oil and gas, pharmaceutical, shipping and marine and also hazmat applications

It’s an advanced multi gas detector with the ability to monitor up to six gases.  This is a pumped model and features the following sensors: advanced PID sensor, combustible gas sensor, carbon monoxide, hydrogen sulphide, sulphur dioxide and oxygen depletion sensors.  The sensors that are used are intelligent, able to store calibration data and can be easily swapped in field.

Key Features
  • On-board gas library of 190 VOCs and 55 combustible gases extensive
  • LCD display with backlighting shows real-time reading of gas concentrations
  • Datalogging capability (6 months for 5 sensors, 24 x 7)
  • Simple 3 button operation
  • Built-in sampling pump. Auto shutoff in low-flow conditions
  • Data can be downloaded to PC with the use of the AutoRAE 2 Automatic Test and Calibration System
Specifications
Range
  • 0 to 5000 ppm VOC
  • 0 to 100% LEL
  • 0 to 500 ppm CO
  • 0 to 30% Vol. O2
  • 0 to 200 ppm H2S
Resolution
  • 0.1 ppm VOC
  • 1% LEL
  • 1 ppm CO
  • 0.1% Vol. O2
  • 0.1 ppm H2S
Dimensions (W x H x D) 7.6" H x 3.8" W x 2.6" D (193 x 96.5 x 66 mm)
Weight 31 oz. (880 g)
Battery Options
  • Rechargeable Li-ion battery (~12 hr runtime, <6hr recharge time)
  • Extended duration Li-ion (~18 hr runtime, <9hr recharge time)
  • Alkaline adapter with 4 x AA batteries (~6 hr runtime)
Calibration Automatic with AutoRAE 2 Test and calibration System or manual
Alarms
  • Audible (95 dB @ 30 cm)
  • Vibration
  • Visible (flashing bright red LEDs)
  • On-screen indication of alarm conditions
Operating Temperature -4° to 122°F (-20° to 50°C)
Humidity 0% to 95% relative humidity (non-condensing)
IP Rating IP-65 for dust and water ingress protection
Hazardous Location Approvals
  • CSA: Class I, Division 1, Groups A, B, C and D, T4
  • ATEX – 0575 II 2G Ex ia d IIC T4 Gb, 1G Ex ia IIC T4 Ga if IR Sensor is not installed I M2 Ex ia d I Mb
  • IECEx – Ex ia d IIC T4 Gb, Ex ia IIC T4 Ga if IR Sensor is not installed I M2 Ex ia d I Mb
  • IECEx/ANZEx: Ex ia d IIC T4 Gb, Ex ia IIC T4 Ga if IR Sensor is not installed Ex ia I Ma
CE Compliance (European Conformity)
  • EMC directive: 2004/108/EC
  • R&TTE directive: 1999/5/EC
  • ATEX directive: 94/9/EC
Warranty
  • Two years on non-consumable components
  • One year on sensor, fan, battery and other consumable parts
What's Included?
  • MultiRAE monitor with sensors as specified
  • Protective rubber boot, swivel belt clip and filter installed
  • Travel charger and adapters for PC communications, AC, calibration and alkaline battery
  • Desktop charging/PC communications cable
  • Toolkit with Hex tool and Philips screwdriver
  • Quick Start Guide and CD with documentation
  • ProRAE Studio II Instrument Configuration & Data Management Software
  • Calibration and test certificate
  • Warranty/registration card
  • 3 x spare external filters
  • PID sensor cap removal tool
  • PID zeroing filter (P/N: 008-3024-000)
  • IP-67/decontamination valve accessory
  • 6" flexi probe with inlet adapter
  • Comes in a hard transport case with custom foam that can also accommodate accessories and 2 calibration gas cylinders with 2 regulators (sold separately)
Take advantage of our web-exclusive free UK mainland* delivery offer on orders over £100 ex VAT.  See all costs for delivery below and visit our main delivery page for more information on timescales as some restrictions may apply.

UK & Ireland Delivery Options

UK Mainland Standard Delivery on orders under £100 ex VAT - £7.95 ex VAT*
UK Mainland Express Delivery - £21.50 ex VAT (timescales vary – please see delivery page)
Highlands Delivery - £25.00 ex VAT
Channel Island Delivery - £40 ex VAT
Northern Ireland & Republic of Ireland - £25 ex VAT
Saturday Delivery Options – Please contact us on 0141 771 7749 for more info

Standard delivery timescales are normally 3-5 working days, depending on stock availability.  Express delivery is normally 1-3 working days, depending on stock availability.  Although we carry an extensive stock, there may be some items that are unavailable due to quantities or otherwise.  In this case we will inform you of the status of your order and whether or not it can be fulfilled within our standard delivery timeframe. *Mainland UK delivery excludes Northern Ireland, other charges apply.

Please visit our main delivery page for more terms and conditions or contact our Sales Team on 0141 771 7749  or [email protected] for more information. Currently, some manufacturers are facing production and delivery issues due to Brexit and custom clearance and this is affecting lead times of even some of our standard stocked items.  We're trying our best to prevent these issues from affecting orders but please be aware that there may be some delays.  We are aiming to communicate this as best and as early as possible. 

International Delivery Options

Delivery costs vary between countries.  Please visit our main delivery page for more information.

You also have the option to 'Arrange Your Own Courier', whereby you organise the shipment of your own goods once they have reached our warehouse.

ORDER CANCELLATION AND GOODS RETURN

Should you wish to cancel an order or return unwanted goods please follow the procedures detailed below to help us ensure cancellations/returns are processed as quickly and efficiently as possible.

Simply log on to your customer account, note the order reference number and email the full cancellation details to [email protected] or contact us on 0141 771 7749. Assuming the order has not been despatched we will cancel.

You have the right to cancel the purchase of goods without having to give a reason at any time within the “cooling off period” of fourteen working days, beginning the day after you take delivery of your order.

You must notify us of your cancellation in writing via email to [email protected] or to our contact address. (Details Here)

If you are in possession of the goods you are under the duty to retain them and take reasonable care of them.

You must send the goods back to us in their original condition to our contact address at your own cost (unless we delivered the item to you in error or the item is damaged or defective) as soon as possible once you have cancelled the contract.

Alternatively we will collect the goods from you which will incur a charge no greater than the actual cost of arranging the collection and shipping. In this case you must make the goods available for collection. We will contact you to make further arrangements.

We reserve the right to make a charge not exceeding our direct costs of recovering the goods if you do not return the goods or return them at our expense.

Upon receipt of returned items in satisfactory condition we will arrange a full credit by the same method used to pay for the goods originally. Any credit due will be processed within a maximum of thirty days.

Note: If you wish to return goods for refund or exchange after 14 days, a re-stocking fee of 20% of the full order total will apply.

If upon receipt of goods you find them to be faulty, damaged or if you have been incorrectly supplied an item, you should notify us within 24 hours by contacting 0141 771 7749 or [email protected] and quoting your order number and contact details.

Frontline Safety will arrange uplift of any damaged or wrongly received goods and if on inspection of goods we also find them to be damaged, faulty or incorrectly supplied, we will offer replacement goods or provide a full refund.

We recommend you inspect all goods prior to signing for and accepting delivery. If there is any visible damage to the outer packaging, ensure goods are sign for as damaged. In instances where it isn’t possible to sign for goods as damaged, these should be signed for as unexamined.


Note: If your goods happen to develop a fault out with the standard returns period but within supplied warranty period or if you require any additional assistance, please contact us on 0141 771 7749 or email [email protected]

IMPORTANT INFORMATION

All postage, handling, customs and duty charges for all returned goods are the responsibility of the customer. We recommend using a fully traceable, insured service as goods are your responsibility while in transit.