Drager X-am 2800 Multi-Gas Detector - LEL / O2 / CO / H2S2>
The Drager X-AM 2800 is a portable gas detector that detect combustible, toxic, and oxygen gas hazards. This lightweight, robust device is easy to use and features a full-colour display that provides clear readings. Its long-life sensors, high-quality construction, and advanced programming options make it suitable for various industrial and commercial applications. The X-AM 2800 is a reliable, cost-effective solution for protecting workers from hazardous gas exposure. It can detect flammable gases, vapours, and O2, CO, NO2, SO2, and H2S.
The Drager X-am 2800 has a 3-year sensor warranty, audible and visual alarms, and a rugged design to withstand drops and falls. The shock-resistant CatEx sensor prevents the need for calibration after a drop or fall.
- Comfortable fleet management with Drager Gas Detection Connect
- Shock-resistant CatEx measures gases and vapours and has very high resistance to shock loads
- Easily operated thanks to its big buttons
- IP68 Rating
Dimensions (W x H x D) | 30 x 48 x 44 mm (5,12 x 1,89 x 1,73'') |
Weight | typically 220 to 250 g, depending on sensor equipment |
Housing | robust 2-component housing |
Display | Matrix display with high resolution |
Ambient Conditions | |
Temperature |
-20 to+50 °C (Measurement and storage) -40 to+50 °C (Use in potentially explosive atmospheres) |
Pressure |
700 to 1300 mbar (Measurement)
|
Relative Humidity | 10 to 95 % r.h. 5 to 95 % r.h. short term |
Protection Class | IP 68 |
Alarms | |
Visual | 3 LED "red" (gas alarms) 3 LED "yellow" (device alarm) |
Audible | Multi-tone > 90 dB at 30 cm |
Vibration | |
More Technical Specifications | |
Energy Supply | NiMH battery (no UN marking (dangerous goods) required during transport), replaceable by user, rechargeable |
Bluetooth | Bluetooth 5.0 (disabled for some countries outside the EU and outside North America, but can be retrofitted. Contact DrägerService) |
Operating Times | typical 12 h (Bluetooth active) typical 100 h without Ex-sensor |
Charging Time | < 4h |
Ready for Measurement | < 60 s after switch-on |
Data logger |
Application of an optimised data compression method with high accuracy and large storage capacity.
|
Approvals | |
Marking Explosion Protection: | |
ATEX | I M1 Ex da ia I Ma II 1G Ex da ia IIC T4 Ga (usable in Ex-Zone 0) |
IECEx | Ex da ia I Ma Ex da ia IIC T4 Ga (usable in Ex-Zone 0) |
CSA (USA & Canada) | Contact Dräger for availability |
EAC | Contact Dräger for availability |
Directives | 2014/34/EU (ATEX) 2014/53/EU (RED) 2011/65/EU (RoHS) |
Manufacturer's Warranty | 4 years for the device (electronics and housing) 3 years for the sensors (except NO2 (1 year) and SO2 (2 years)) 1 year for the energy supply (accumulator) |