Drager X-am 5000 Hydrogen Gas Detection Kit
The Drager X-am 5000 is a multi gas detector which is able to house 1 to 5 gas sensors. This particular version of the X-am only houses a hydrogen (H2) sensor.
The X-am 5000 gas detector is ideal for personal monitoring applications. It’s a flexible monitor meaning it’s possible to exchange, upgrade or calibrate the Drager XXS sensors to detect other gases.
The gas detector itself is tough and durable which helps with operational costs. It has a service lifetime of approximately four years and comes with a rubberised housing and shock-proof sensors. The datalogging function can read out via infrared > 1000 hours (although this is based on 5 gases) with a recording level of 1 value per minute.
- Practical and light weight
- Easy to carry
- Two-button control
- Easy-to-follow menu on a large display
- IP67 – water and dust resistant
- Resistant to electromagnetic interference
- Gas inlets at top and bottom of unit
Sensor Info |
|
Dimensions (W x H x D) |
48 x 130 x 44 mm; 1.89 x 5.12 x 1.73 in. |
Weight |
220 - 250 g; 7.8 - 8.8 oz. |
Ambient Conditions |
Temperature: -20 - +50 °C; -4 - 122 °F Pressure: 700 - 1300 hPa Humidity: 10 - 95% r.h. |
Alarms |
Visual - 360° Audio – Multi-tone >90 dB at 30cm Vibrating |
Operating Time |
> 12 hours (without Ex sensor > 700 hours) when using the Save Energy Mode > 40 hours |
Charging Time |
< 4 hours |
Approvals |
|
ATEX |
I M1 Ex ia I II 1G Ex ia IIC T3 (Zone 0) I M2 Ex d ia I II 2G Ex d ia IIC T4/T3 Measurement performance certificate according to: - EN 50104 (2002) + A1 (2004) O2 - EN 45544 CO & H2S - EN 60079-29-1:2007 Methane to Nonane - EN 50271:2001 Software and Documentation |
UL |
Class I & II, Div. 1 Group A, B, C, D, E, F, G T.-Code T4/T3 |
CSA |
Class I, Div. 1 Group A, B, C, D T.-Code T4/T3 |
IECEx |
Ex ia I Ex ia IIC T3 Ex d ia I Ex d ia IIC T4/T3 |
CE-Mark |
Electromagnetic compatibility Directive 2004/108/EG; EN 50270:2006 |
MED |
Marine Equipment Directive 96/98/EC |
MSHA |
|