Honeywell Transmission Risk Air Monitor (V2 - Wireless)
Honeywell has introduced the Transmission Risk Air Monitor V2 - Wireless. This is another cost-effective solution for reducing the risk of exposure to any airborne viral transmission. Still suited for use in schools, universities, classrooms, cafes, restaurants and other small buildings such as offices. The main difference is that this is a wireless version.
The Honeywell Transmission Risk Air Monitor (HTRAM) observes carbon dioxide (CO2) levels and considers some user-controlled settings (like the type of human activity present*) to alert users when there is a high risk of transmission. This is a real-time monitor.
A traffic light system of red, yellow and green is used to easily identify the current conditions. A sound alarm will also make users aware of the risk of airborne transmissions (based on detectable CO2 levels) have increased.
The HTRAM has three pre-programmed settings to identify what type of indoor setting the monitor is being used. These are low, medium and high activity. Examples of each type of activity can be found below. High activity settings for areas such as a gym, arenas or community centres are recommended for coverage of approximately 800-1000 square feet.
Honeywell has used guidance from research by the University of Colorado and combined this with Honeywell algorithms to determine typical air quality conditions. This includes factors such as the average size of a room, the number of people in it, a typical breathing rate and the duration of occupancy.
- Lightweight design carried easily and mountable
- CO2 (NDIR) 400 ppm to 2000 ppm and up to 10,000 ppm extended range
- Purchase an AC Adapter for extended run times and simpler charging
What’s in the box? |
Transmission risk air monitor , USB charger and Manual |
Weight & Dimensions |
· 150g · 80 mm × 80 mm × 22 mm · [3.1 in × 3.1 in × 0.87 in] |
Detection Range |
CO2 (NDIR) - 400 ppm to 2000 ppm, up to 10,000 ppm extended range |
Housing Materials |
Aluminum alloy and plastic |
Display |
TFT |
Input Voltage |
5V |
Input Current |
1A |
Battery |
· Lithium-ion rechargeable battery · 10-hour battery time · 2600 mAh capacity · USB Port – micro USB |
Temperature & Humidity |
Operating - 0°C to 40°C, 0% RH to 90% RH Sensor - -20°C to 60°C or -4°F to 140°F, 0% RH to 100% RH |
|
*The Honeywell Transmission Risk Air Monitor (HTRAM) analyzes specific air quality conditions and alerts the user when conditions are present that may increase the risk of exposure to airborne viral transmission. It does not prevent or reduce virus transmission nor mitigate viruses that may be present, nor does it detect or warn against the presence of any virus, including but not limited to COVID-19. The HTRAM does not repel or destroy any microorganism, viruses, bacteria, or germs. Please refer to and read the datasheet for more terms and conditions on the Honeywell Transmission Risk Air Monitor, available in our downloads section above. |