Honeywell BW Solo Ozone (O3) Serviceable Single Gas Detector
The BW Solo single gas detector is a reusable monitor, designed to reduce costs whilst still ensuring workers are protected and compliant.
This version of the BW Solo is for monitoring levels of Ozone (O3) gas in various applications.
This single gas detector is available in numerous configurations including O2, CO, H2S, NH3, CO2, SO2, HCN, CL2, NO, NO2, PH3, ETO, CLO2, O3 and H2. It has a typical battery life of 6-12 months, depending on the type of sensor chosen. The Solo is the first single gas detector to use 1-series sensors for CO, H2S and O2. This makes it highly accurate, fast-responding but at a low cost.
It’s easy to maintain and the sensors, batteries and sensor filters can be replaced without having to take the unit apart. There's an option to activate the Intelliflash or non-compliance flash to show at a glance that the unit is ready to be used in operation. It comes with a triple alarm system showing a visual alarm, vibrating alarm and audible alarm when gas is present.
- Can be used with the IntelliDox for automatic bump and calibration
- Simple user interface which is easy to read
- Remote visibility on alarms
- Ability to assign detectors to different workers and locations
- Data logging with rolling 24-hour peak reading
- IP66/68 rated
- Carries out self-test and checks sensor integrity, battery, circuitry and alarms
Measuring Range |
0-1ppm |
Resolution |
0.01ppm |
Size |
2.7 x 2.6 x 1.4 in. / 7.0 x 6.7x 3.6 cm (1-Series sensor models) |
Weight |
3.6 to 4.1 oz. / 103 to 116 g, depending on installed sensor |
Temperature & Humidity |
-30 to +50° C/-22 to 122°F |
Typical Battery Life |
12 months |
User Options |
|
Approvals |
n: Class I, Division 1, Groups A, B, C, D T4 Class I, Zone 0, AEx/Ex ia IIC T4 Ga -40°C≤ Tamb ≤ 60°C *CO2 version currently non-ATEX. Approval pending for ATEX. |
Warranty |
2 years for 4-Series detectors and sensors |